Investigation of Finite Amplitude Stability Due to Process Damping in Milling

stability and attraction domains of traffic equilibria in day-to-day dynamical system formulation

در این پژوهش مسئله واگذاری ترافیک را از دید سیستم های دینامیکی فرمول بندی می کنیم.فرض کرده ایم که همه فاکتورهای وابسته در طول زمان ثابت باشند و تعادل کاربر را از طریق فرایند منظم روزبه روز پیگیری کنیم.دینامیک ترافیک توسط یک نگاشت بازگشتی نشان داده می شود که تکامل سیستم در طول زمان را نشان می دهد.پایداری تعادل و دامنه جذب را توسط مطالعه ویژگی های توپولوژیکی تکامل سیستم تجزیه و تحلیل می کنیم.پاید...

Process Damping Analytical Stability Analysis and Validation

INTRODUCTION The analytical stability lobe diagram offers a predictive capability for selecting stable chip width-spindle speed combinations in machining operations [1-4]. However, the increase in allowable chip width provided at spindle speeds near integer fractions of the system’s dominant natural frequency is diminished substantially at low spindle speeds where the stability lobes are closel...

Investigation of laser milling process characteristics for micro tooling applications

Effect of Milling Process on Colloidal Stability, Color and Rheological Properties of Pistachio Paste

Pistachio paste is produced from ground roasted kernel. This study focused on the influence of the milling process on colloidal stability, rheological behavior and color of pistachio paste. The colloidal stability of pistachio paste samples increased with a reduction of particle size from 31.4 to 15.10µm. The Herschel-Bulkley model was found to be the best model to describe the flow behavior of...

Experimental evaluation of critical axial depth of cut with magneto rheological damping in end milling process

An end milling process is widely used in fabrication of complex contours and shape parts at high spindle speeds. Many researchers try to investigate one of important aspect, which come across during machining is the self exited chatter vibration which causes severe damage of the tool and quality of the machined surface. The present work is focused on the Magneto-Rheological Damping effect on st...