Investigation of Heavy Metal (Lead) Removal from Aqueous Solution by Using Advanced Oxidation Process (Fenton)
نویسندگان
چکیده
منابع مشابه
Aniline Degradation Using Advanced Oxidation Process by UV/Peroxy Disulfate from Aqueous Solution
This study is focused on removing toxic aniline from aqueous solutions using advanced oxidation process by UV/ peroxy disulfate. In this study, the effect of various parameters including pH (3-9), the level of radiation (ultraviolet 30 watt lamp, number 2-5), peroxy disulfate dose (0.02 – 0.08 mol/l) and the initial concentration (20 – 100 mg/l) at different contact times (10 – 60 min) on the e...
متن کاملRemoval of Heavy Metals from Aqueous Solution by Mordenite Nanocrystals
This study examined the ability of the synthetic mordenite nanocrystal to remove Tl(III) and As(III) from an aqueous solution. The determination of the concentration changes of H+ and OH- quantities in the acidic (pH 3) and alkali (pH 9) treated mordenite nanocrystals were done by the potentiometric titration curves. The maximum uptake capacities (Qmax) of these metal ions using the mordenite i...
متن کاملRemoval of Lead (II) from Aqueous Solution Using Cocopeat: An Investigation on the Isotherm and Kinetic
The aim of the present work was to investigate the ability of Cocopeat to remove of lead (II) from aqueous solutions. The effects of different parameters such as particle size, adsorbent dosage, pH, contact time, agitation speed and concentration on the removal process has been investigated. The maximum removal of lead ion (92.5%) took place in the pH range of 4 contact time in 30 minutes a...
متن کاملRemoval of Malachite Green Dye from aqueous solution by Fenton Oxidation
In order to see the influence of different variable parameters (initial pH of the solution, Fe++ concentration and H2O2 concentration) and the efficiency to remove Malachite Green dye (Basic Green 4) from aqueous solution, Fenton Oxidation method was employed. Then different parameters were studied using known concentration (150 mg/l) and initial COD (256 mg/l) of prepared dye synthetic solutio...
متن کاملEvaluating the Fenton Process Efficiency in Removal of Reactive Red 2 from Aqueous Solution
Introduction: Dyes are visible materials and are considered as one of the hazardous components that make up industrial waste. Therefore it is removed from bodies of water, using various methods. In this regard, the Fenton oxidation process is one of the most effective ways to remove colored contaminants in aquatic environments, which has many applications today. Materials and Methods: In this...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chemical Science International Journal
سال: 2019
ISSN: 2456-706X
DOI: 10.9734/csji/2019/v27i230111