Investigation of the Cross-Cutting Polycrystalline Diamond Compact Bit Drilling Efficiency
نویسندگان
چکیده
منابع مشابه
Investigation of Thermal Operational Regimes for Diamond Bit Drilling Operations (TECHNICAL NOTE)
This paper reviews existing studies and investigates thermal operational regimes of diamond bit during drilling operations. The operating temperature of the diamond core drill is studied under bench condition and an optimal thermal range are presented. Based on this study, it was noted that glazing of diamond tools is observed at temperatures less than 327°C, and normal wear of diamond tools is...
متن کاملWaterjet Assisted Polycrystalline Diamond Indentation Drilling of Rock
The use of high-pressure waterjets as a method for enhancing the performance of mechanical cutting tools has been well documented over the years. However, concurrent with this development for drag bit tools, there has been some evidence that the combination was not an effective one. By using sectioned samples of rock indented with a spherical indentor (of the type used in percussive drilling) t...
متن کاملUV photoemission efficiency of polycrystalline CVD diamond films
The absolute quantum efficiency of polycrystalline diamond films grown on silicon substrates by chemical vapor deposition (CVD) is reported in the range of 25–200 nm. The efficiency of boron-doped and hydrogen-activated by microwave plasma reflective photocathodes peaked at 37% at 40 nm with the sensitivity cutoff observed at ~190 nm. We confirmed that hydrogen activation is relatively stable i...
متن کاملDrilling Mechanism Investigation on SiC Ceramic Using Diamond Bits
Results and Conclusions: The results show that, brittle fracture is the dominant way for SiC ceramic’s removal mechanism, plastic deformation always exists during the drilling process. Brittle fracture includes cleavage fracture, transgranular fracture, intergranular fracture, material peeling off and grain boundary breakage; resintering and recrystallization happen under the joint action of gr...
متن کاملDesign Front Rake Angle of PDC Bit Based on Solid Works Simulation Method
In order to solve the bit front rake angle parameter selection problem of under different coal rock, it is proposed in polycrystalline diamond compact no core bit as the research object, and established a bit compact two-dimensional stress model of cutting teeth. The result shows that the front rake angle is the factor of cutting force and the drilling efficiency. Application of Solid Works sim...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Shock and Vibration
سال: 2021
ISSN: 1875-9203,1070-9622
DOI: 10.1155/2021/8841255