Investigation of the fatigue characteristics of warm stone matrix asphalt (WSMA) containing electric arc furnace (EAF) steel slag as coarse aggregate and Sasobit as warm mix additive
نویسندگان
چکیده
منابع مشابه
Fatigue Behavior Analysis of Asphalt Mixes Containing Electric Arc Furnace (EAF) Steel Slag
This research was conducted in order to evaluate fatigue behavior of asphalt mixes containing Electric Arc Furnace (EAF) steel slag. After initial evaluation of the properties of EAF steel slag using X-ray Diffraction (XRD) and Scanning Electric Microscope (SEM), six sets of laboratory mixtures were prepared. Each set were treated replacing various portions of limestone aggregates of the mix wi...
متن کاملfatigue behavior analysis of asphalt mixes containing electric arc furnace (eaf) steel slag
this research was conducted in order to evaluate fatigue behavior of asphalt mixes containing electric arc furnace (eaf) steel slag. after initial evaluation of the properties of eaf steel slag using x-ray diffraction (xrd) and scanning electric microscope (sem), six sets of laboratory mixtures were prepared. each set were treated replacing various portions of limestone aggregates of the mix wi...
متن کاملNcat Evaluates Warm Mix Asphalt
In addition to lower emissions warm mix asphalt has several advantages over hot mix asphalt such as fuel energy savings, decreased binder aging and an extended paving season (Photo courtesy: Matthew Corrigan, FHWA) The National Center for Asphalt Technology (NCAT) is evaluating warm mix asphalt (WMA) technologies. WMA technology allows the mixing, lay down, and compaction of asphalt mixes at si...
متن کاملElectric Arc Furnace Slag and Blast Furnace Dust, Use for the Manufacture of Asphalt Concrete for Roads
This paper analyzes how feasible it is to use electric arc furnace slag as coarse aggregate, and blast furnace dust as fine aggregate in the manufacture of hot asphalt concrete for roads. Three mixtures were designed using the Ramcodes methodology, the M1 mixture of control with conventional materials, the M2 mixture replacing 50% and the M3 mixture replacing 100% of the conventional aggregates...
متن کاملInvestigation of Warm-Mix Asphalt Using Iowa Aggregates
The implementation of WMA is becoming more widespread with a growing number of contractors using various WMA technologies. Early research suggests WMA may be more susceptible to moisture damage than traditional HMA mixes. Asphalt performance tests can be a good way of measuring material responses that can be correlated with pavement performance. It is important for owner/agencies to know that t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Case Studies in Construction Materials
سال: 2019
ISSN: 2214-5095
DOI: 10.1016/j.cscm.2019.e00265