Investigation of X70 line pipe steel fracture during single edge-notched tensile testing using acoustic emission monitoring
نویسندگان
چکیده
منابع مشابه
Monitoring Fracture of Steel Corroded Reinforced Concrete Members under Flexure by Acoustic Emission Technique
Acoustic emission (AE) technique is used for monitoring and evaluating the influence of corrosion on the structural behaviour of steel reinforced concrete (RC) beams under three-point flexure test. In this study, steel corrosion was accelerated by electro-chemical method utilising a direct current (DC) power supply and 5% sodium chloride (NaCl) solution. The steel corrosion that was induced int...
متن کاملAcoustic Emission Response of Ti6al4v Alloy in Different Heat Treatment Conditions During Tensile Testing
Acoustic Emission (AE) Technique is a unique Non Destructive Testing method being used as a global online monitoring tool for detection, location and characterization of various kinds of active defects. This paper illustrates the attempt to find the AE response of Ti6Al4V Alloy in different heat treatment conditions during tensile testing. Ti6Al4V alloy is tested in mill annealed, beta annealed...
متن کاملAcoustic Emission Monitoring for Assessment of Steel Bridge Details
Acoustic emission (AE) testing was deployed on details of two large steel Interstate Highway bridges: one cantilever through-truss and one trapezoidal box girder bridge. Quantitative measurements of activity levels at known and suspected crack locations were made by monitoring AE under normal service loads (e.g., live traffic and wind). AE indications were used to direct application of radiogra...
متن کاملFlexural monitoring of carbon fiber/epoxy composite by acoustic emission
Carbon / epoxy composite is one of the most useful polymer matrix composites that has special properties such as high strength-to-weight ratio, high hardness, high corrosion resistance, Resistance to nuclear radiation has high consumption in different industries such as aerospace industry. Therefor monitoring of loading of this type of composite is important. In order to determine failure mecha...
متن کاملStatic and Fatigue Behavior Investigation of Artificial Notched Steel Reinforcement
Pitting corrosion is one of the most common forms of localized corrosion. Corrosion pit results in a stress concentration and fatigue cracks usually initiate and propagate from these corrosion pits. Aging structures may fracture when the fatigue crack reaches a critical size. This paper experimentally simulates the effects of pitting morphologies on the static and fatigue behavior of steel bars...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Science and Engineering: A
سال: 2015
ISSN: 0921-5093
DOI: 10.1016/j.msea.2015.06.030