Investigation on 3D fatigue crack propagation in surface-cracked specimens

Fatigue crack propagation in microcapsule - toughened epoxy

The addition of liquid-filled urea-formaldehyde (UF) microcapsules to an epoxy matrix leads to significant reduction in fatigue crack growth rate and corresponding increase in fatigue life. Mode-I fatigue crack propagation is measured using a tapered doublecantilever beam (TDCB) specimen for a range of microcapsule concentrations and sizes: 0, 5, 10, and 20% by weight and 50, 180, and 460 lm di...

High Temperature Fatigue Crack Propagation in INCONEL718

Mechanical Characteristics on Fatigue Crack Propagation in Aluminium Plate

This paper present a mechanical characteristics on fatigue crack propagation in Aluminium Plate based on strain and stress distribution using the abaqus software. The changes in shear strain and stress distribution during the fatigue cycle with crack growth is identified. In progressive crack in the strain distribution and the stress is increase in the critical zone. Numerical Modal analysis of...

Stochastic modeling of fatigue crack propagation

This paper presents a stochastic model of fatigue-induced crack propagation in metallic materials. The crack growth rate predicted by the model is guaranteed to be non-negative. The model structure is built upon the underlying principle of Karhunen±Lo eve expansion and does not require solutions of stochastic di€erential equations in either Wiener integral or Itô integral setting. As such this ...

Thermal activation of fatigue crack growth: analysing the mechanisms of fatigue crack propagation in superalloys

A method for deriving apparent activation energies, Eapp, for fatigue crack growth (FCG) is presented. It is shown how these Eapp values can be used to analyse the main underlying mechanism causing the progression of the crack. The Eapp values for fatigue crack growth in air and vacuum, and with and without a dwell are obtained for a range of Ni based superalloys for turbine disc applications. ...