Investigation on fiber coating and treatment on mechanical properties of fiber composites

نویسندگان

چکیده

The purpose of this project is to investigate on mechanical properties fibre coated reinforced composites. Tensile the flax fabrics tested at different resin treatment. tensile test evaluate effect epoxy coating strength fiber and predict behavior how influence results show that epoxy-coated considerably higher compared with non-coated composite materials. reference sample, i.e., without 18.7 MPa low value 19.3 MPa. It important consider, there a large number factors affecting fiber, for curing temperature, combination, arrangement etc. Consequently, it not possible compare accurately achieved values literature. To best authors’ knowledge no previously published work using high modulus. So, latter assumption should be checked in separate study.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of Fiber Surface Treatment on Wear Characteristics of Carbon Fiber Reinforced Polyamide 6 Composites

Ozone modification method and air-oxidation were used for the surface treatment of polyacrylonitrile(PAN)-based carbon fiber. The surface characteristics of carbon fibers were characterized by X-ray photoelectron spectroscopy (XPS). The interfacial properties of carbon fiber reinforced polyamide 6 (CF/PA6) composites were investigated by means of the single fiber pull-out tests. As a result...

متن کامل

Effective mechanical properties of ‘‘fuzzy fiber’’ composites

In this paperwe investigate themechanical behavior of carbonfiber composites,where the carbonfibers are coated with radially aligned carbon nanotubes. For this purpose we develop a general micromechanics method for fiber composites, where fibers are coated with radially aligned microfibers (‘‘fuzzy fiber’’ composites). The mechanical effective properties are computed with a special extension of...

متن کامل

Experimental Investigation on Mechanical Properties of Coal Ash Reinforced Glass Fiber Polymer Matrix Composites

Glass fiber reinforced polymer composites are one of the most widely used composite materials. The addition of Coal ash to polymer matrix dramatically increases the overall mechanical strength of the composite material as compared to the polymer composite. In view of this, a method is proposed for mixing coal ash powder (size 52-75 μm) into resin and Ash reinforced polymer composites are fabric...

متن کامل

Polystyrene cellulose fiber composites: effect of the processing conditions on mechanical and dynamic mechanical properties

The usage of natural fibers on the composites development has grown rapidly in the recent years due to the fibers plentiful availability, renewable source, low density and biodegradability. However, there are some drawbacks, for instance, the fiber dispersion on a polyolefin matrix. In this work, the influence of processing speed on the mechanical and dynamic mechanical properties of polystyren...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: International Journal of Health Sciences (IJHS)

سال: 2022

ISSN: ['2550-6978', '2550-696X']

DOI: https://doi.org/10.53730/ijhs.v6ns5.9401