Investigation on Flexural strength of Polymer nanocomposites modified by MWCNT and Glass fiber

نویسندگان

چکیده

The glass-reinforced laminated composite is widely used in place of conventional structural materials. glass fiber composites demonstrate outstanding strength the uniaxial direction. effect carbon nanotube reinforcement percentage on flexural polymer investigated this article. final laminates has been found to improve by reinforcing Carbon nanotube. small incorporation MWCNT improves up 51.3%. 1.0 wt.% into GFRP shows 51.3% improvement comparison composites. MWCNTs plays a prominent role enhance mechanical features developed samples. SEM image examine nature and mechanics failure. This study highlights carbon-based nanomaterial reinforced epoxy

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Behavioral Compression of Polyolfin-Aramid Fiber and Glass Fiber on Flexural Strength of Leca Concrete

LIGHTWEIGHT CONCRETE May consist of lightweight aggregates are used in ordinary concrete of coarse aggregate and sand, clay, foamed slag, clinker, crushed stone, aggregates of organic and inorganic. It used in different common shapes such as light weight aggregate concrete [1], concrete without fine [2] or concrete with bubble [3]. It is replaced by normal concrete in several applications becau...

متن کامل

Behavioral Compression of Polyolfin-Aramid Fiber and Glass Fiber on Flexural Strength of Leca Concrete

LIGHTWEIGHT CONCRETE May consist of lightweight aggregates are used in ordinary concrete of coarse aggregate and sand, clay, foamed slag, clinker, crushed stone, aggregates of organic and inorganic. It used in different common shapes such as light weight aggregate concrete [1], concrete without fine [2] or concrete with bubble [3]. It is replaced by normal concrete in several applications becau...

متن کامل

Evaluation of the flexural strength of carbon fiber-, quartz fiber-, and glass fiber-based posts.

This study investigated the flexural strength of eight fiber posts (one carbon fiber, one carbon/quartz fiber, one opaque quartz fiber, two translucent quartz fiber, and three glass fiber posts). Eighty fiber posts were used and divided into eight groups (n = 10): G1: C-POST (Bisco); G2: AESTHETI-POST (Bisco); G3: AESTHETI-PLUS (Bisco); G4: LIGHT-POST (Bisco); G5: D.T. LIGHT-POST (Bisco); G6: P...

متن کامل

Flexural strength and morphological characteristics of resin-modified glass-ionomer containing bioactive glass.

INTRODUCTION Recent advances in dental materials have led to the production of smart materials. Recently, addition of bioactive materials to glass-ionomer cements has resulted in new capabilities beyond the beneficial effects of fluoride release. This in vitro study compared the flexural strengths (FS) of a resin-modified glass-ionomer containing bioactive glass (RMGIBAG) with that of a commonl...

متن کامل

Effects of glass fiber layering on the flexural strength of microfill and hybrid composites.

STATEMENT OF THE PROBLEM In stress-bearing cavities, low fracture resistance adversely affects the longevity of the dental resin composite restorations. PURPOSE The aim of this in vitro study was to investigate the effect of glass fiber layering on the flexural strength of microfill and hybrid composites. MATERIALS AND METHODS Flexural test specimens (N = 75) were prepared according to Inte...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: E3S web of conferences

سال: 2021

ISSN: ['2555-0403', '2267-1242']

DOI: https://doi.org/10.1051/e3sconf/202130901224