(Invited) Single-Grain Si Tfts Fabricated on a Precursor from Doctor-Blade Coated Liquid-Si
نویسندگان
چکیده
منابع مشابه
Single-grain Si thin-film transistors on flexible polyimide substrate fabricated from doctor-blade coated liquid-Si
from doctor-blade coated liquid-Si J. Zhang, M. Trifunovic, M. van der Zwan, H. Takagishi, R. Kawajiri, T. Shimoda, C. I. M. Beenakker, and R. Ishihara Delft University of Technology, Delft Institute of Microsystems and Nanoelectronics (DIMES), Feldmannweg 17, 2628CT, Delft, The Netherlands Japan Science and Technology Agency, ERATO, SHIMODA Nano-Liquid Process Project, 2-5-3 Asahidai, Nomi, Is...
متن کاملAutomated Digital Circuits Design Based on Single-Grain Si TFTs Fabricated Through μ-Czochralski (Grain Filter) Process
W. Fang, A. van Genderen, R. Ishihara, R. Vikas, N. Karaki*, Y. Hiroschima*, S. Inoue*, T. Shimoda*, J. W. Metselaar and C. I. M. Beenakker Delft Institute of Microelectonics and Submicrontechnology (DIMES) Delft Univ. of Technol. Feldmannweg 17, POBox 5053, 2600 GB Delft, The Netherlands *Technology Platform Research Center, Seiko-Epson Corp., Nagano, Japan Tel: +31 15 2788498, Fax: +31 15 262...
متن کاملSingle-Grain Si Thin-Film Transistors for Monolithic 3D-ICs and Flexible Electronics
We review our recent achievements in monolithic 3D-ICs and flexible electronics based on single-grain Si TFTs that are fabricated inside a single-grain with a low-temperature process. Based on pulsedlaser crystallization and submicron sized cavities made in the substrate, amorphous-Si precursor film was converted into poly-Si having grains that are formed on predetermined positions. Using the m...
متن کاملAmorphous Si TFTs on Plastically-Deformed Spherical Domes
There is a growing interest in the design and fabrication of flexible and rugged electronics particularly for large-area displays and sensor arrays. In this work, we describe the fabrication of amorphous silicon (a-Si:H) thin film transistors (TFTs) on a Kapton substrate which can be permanently deformed into a spherical cap shape. This level of strain would crack uniform a-Si:H device films. ...
متن کاملReplication performance of Si-N-DLC-coated Si micro-molds
Micro-hot-embossing is an emerging technology with great potential to form microand nano-scale patterns into polymers with high throughput and low cost. Despite its rapid progress, there are still challenges when this technology is employed, as demolding stress is usually very high due to large friction and adhesive forces induced during the process. Surface forces are dominating parameters in ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ECS Transactions
سال: 2014
ISSN: 1938-6737,1938-5862
DOI: 10.1149/06410.0031ecst