Ion source development at RTNS-II
نویسندگان
چکیده
منابع مشابه
Ion Source Development at the Agor Facility∗
This paper discusses the present status of ion source development at KVI. Work is mainly focussed on increasing the beam intensity of the ECRIS injector and to optimize the beam transport and injection into the AGOR cyclotron. The ultimate goal is to deliver a 1 kW beam of heavy ions on target. Recent progress towards this goal is discussed. We also present the first results of beam extraction ...
متن کاملProgress of resonant ionization laser ion source development at GANIL.
SPIRAL2 (Système de Production d'Ions Radioactifs Accélérés en Ligne) is a research facility under construction at GANIL (Grand Accélérateur National d'Ions Lourds) for the production of radioactive ion beams by isotope separation on-line methods and low-energy in-flight techniques. A resonant ionization laser ion source will be one of the main techniques to produce the radioactive ion beams. G...
متن کاملIon Source Development and Operation
A new vacuum arc type ion source (VARIS) has been developed and tested for high current uranium operation. Figure 1 shows a cross sectional view of the ion source. The discharge arrangement has a tubular anode opposite to the cathode mount carrying 17 cathodes (each one is 5.7mm in diameter and 17mm in length). The anode, made of stainless steel, is placed 15mm apart from the cathode. Its apert...
متن کاملIon Beam Cocktail Development and Ecr Ion Source Plasma Physics Experiments at Jyfl*
The accelerator based experiments at JYFL (University of Jyväskylä, Department of Physics) range from basic research in nuclear physics to industrial applications. A substantial share of the beam time hours is allocated for heavy ion beam cocktails, used for irradiation tests of electronics. Producing the required ion beam cocktails has required active development of the JYFL ECR ion sources. T...
متن کاملDevelopment of a microwave ion source for ion implantations.
A microwave ion source is expected to have a long lifetime, as it has fewer consumables. Thus, we are in the process of developing a microwave ion source for ion implantation applications. In this paper, we report on a newly developed plasma chamber and the extracted P(+) beam currents. The volume of the plasma chamber is optimized by varying the length of a boron nitride block installed within...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
سال: 1985
ISSN: 0168-583X
DOI: 10.1016/0168-583x(85)90106-5