Iron Aluminide Coating on Steel Surface by Mechanical Alloying at Elevated Temperature
نویسندگان
چکیده
منابع مشابه
Nanocrystalline Hydroxyapatite/Si Coating by Mechanical Alloying Technique
A novel approach for depositing hydroxyapatite (HA) films on titanium substrates by using mechanical alloying (MA) technique has been developed. However, it was shown that one-hour heat treatment at 800°C of such mechanically coated HA layer leads to partial transformation of desired HA phase to beta-tri-calcium phosphate (β-TCP) phase. It appears that the grain boundary and interface defects f...
متن کاملNickel aluminide containing refractory-metal dispersoids: 1: Synthesis by reactive mechanical alloying
Nickel and aluminum powders were mechanically alloyed with 10 or 30 vol.% refractory metal powders (molybdenum or tungsten) for times up to 50 h. Intermetallic synthesis takes place after lo-20 h alloying, with concomitant dispersion of the inert refractory metal phase, resulting in an NiAl matrix containing fine refractory dispersoids. The reactive synthesis step is direct, without intermediat...
متن کاملOrigin of predominance of cementite among iron carbides in steel at elevated temperature.
A long-standing challenge in physics is to understand why cementite is the predominant carbide in steel. Here we show that the prevalent formation of cementite can be explained only by considering its stability at elevated temperature. A systematic highly accurate quantum mechanical study was conducted on the stability of binary iron carbides. The calculations show that all the iron carbides ar...
متن کاملProperties of Low-alloy High-speed Steel at Elevated Temperature
J. Jaworski, T. Trzepieciński: Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, Rzeszów, Poland This paper presents the results of research on the determination of the coefficient of thermal conductivity and hot hardness of cutters made of selected grades of low-alloy high-speed steels, HS 6-5-2 and HS3-1-2. The investigations of hot hardness and yield stress...
متن کاملHigh Temperature Deformation Behavior of Cr-containing Superplastic Iron Aluminide
Superplastic deformation and high temperature load relaxation behavior of coarse-grained iron aluminides with the composition of Fe-28 at.% Al have been investigated. A series of load relaxation and tensile tests were conducted at temperatures ranging from 600 to 850C. The flow curves obtained from load relaxation tests were found to have a sigmoidal shape and to exhibit stress vs. strain rate ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Materials Research Society of Japan
سال: 2009
ISSN: 1382-3469,2188-1650
DOI: 10.14723/tmrsj.34.565