Iron-based Element for Low Temperature Thermoelectric Generator
نویسندگان
چکیده
منابع مشابه
A 1 KW Thermoelectric Generator for Low-temperature Geothermal Resources
Most of the current thermal power-generation technologies must first convert thermal energy to mechanical work before producing electricity. Thermoelectric generation technology, as one entirely solid-state energy conversion method, can directly transform thermal energy into electricity by using thermoelectric transformation materials. A thermoelectric power converter has no moving parts, and i...
متن کاملA High Temperature Experimental Characterization Procedure for Oxide-Based Thermoelectric Generator Modules under Transient Conditions
The purpose of this study is to analyze the steady-state and transient behavior of the electrical and thermal parameters of thermoelectric generators (TEGs). The focus is on the required wait-time between measurements in order to reduce measurement errors which may appear until the system reaches steady-state. By knowing this waiting time, the total characterization time can also be reduced. Th...
متن کاملLoad Frequency Control Based on Improved Fuzzy Controller in the Microgrid with Thermoelectric Generator
The Microgrid is a small-scale controlled power system, which can be used in islanded mode or in a grid-connected one to provide power. In the islanded Microgrid, the system frequency will be affected severely by the smallest disturbance which can happen due to light inertia in the system. In the independent Microgrid, several generation sources such as solar, wind, and so on can be considered....
متن کاملDesign and analysis of a thermoelectric generator for a heavy-duty vehicle in real road test
Heavy duty vehicles have a great share on fossil fuel consumption and greenhouse gases in the world, while they waste two third of chemical energy of fuel. On the other hand, simplicity and long life of thermoelectric generators (TEGs) are considered more and more to convert thermal energy to electrical one. In this paper a TEG designed in the exhaust system of Renault Midlum 195 Dxi Engine. Th...
متن کاملScreen printed flexible Bi2Te3-Sb2Te3 based thermoelectric generator
This paper reports the fabrication and testing of Bismuth Tellurium (Bi2Te3) – Antimony Tellurium (Sb2Te3) based thermocouples using screen printing technology. In this study, screen printable thermoelectric pastes were developed and the transport properties of cured material were measured. The dimension of each planer thermoleg is 39.3 mm × 3 mm with a thickness of 67 μm for Bi2Te3 leg and 62 ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1997
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.83.2_157