Iron Matrix Transformations and Mechanical Properties of Fe-25Cr-C-B Eutectic Cast Alloys
نویسندگان
چکیده
منابع مشابه
Mechanical behaviour of Fe-C alloys during phase transformations
The mechanical behaviour of Fe-C aiioys have been determined in their phase transformation ranges during isothermal or anisothermal transformations. Two models an analytical model and a fii te element model have been used in order to calculate the behaviour of the material. Considering a macroscopic scale, these models show that the mechanical behaviour can be well described when an additional ...
متن کاملEutectic Solidification Limits and Mechanical Properties of Sm-Co-Fe Alloys
Creating a permanent magnet with a higher energy product than existing materials is attractive in order to optimize magnetic performance. The eutectic microstructure of Sm-Co alloys is attractive for magnets since primary rods of the Co-phase can act as a soft magnetic phase in the matrix of the Sm 2 Co 17 hard magnetic phase, forming two-phase magnets. Fe replacement in Sm-Co alloys provides a...
متن کاملdetermination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولMechanical properties and grindability of dental cast Ti-Nb alloys.
Aiming at developing a dental titanium alloy with better mechanical properties and machinability than unalloyed titanium, a series of Ti-Nb alloys with Nb concentrations up to 30% was made. They were cast into magnesia-based molds using a dental casting machine and the mechanical properties and grindability of the castings were examined. The hardness of the alloys with Nb concentrations of 5% a...
متن کاملMechanical properties of magnetostrictive iron-gallium alloys
Single crystal specimens of Fe-17 at. % Ga were tested in tension at room temperature. Specimens with a tensile axis orientation of [110] displayed slip lines on the specimen faces corresponding to slip on the {110}with a critical resolved shear stress of 220 MPa. Yielding began at 0.3% elongation and 450 MPa. An ultimate tensile strength of 580 MPa was observed with no fracture occurring throu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of the Society of Materials Engineering for Resources
سال: 2002
ISSN: 1884-6629,1347-9725
DOI: 10.5188/ijsmer.10.99