Iron ore filtration process improvement through pH modification

Effective Beneficiation of Low Grade Iron Ore Through Jigging Operation

The effectiveness of jigging operation for the beneficiation of low-grade iron ore deposits of Orissa, India has been investigated. Iron ore sample obtained from Barbil region of Orissa containing very high amount of silica and alumina was crushed using the laboratory jaw crusher and roll crusher to prepare different particle sizes. The sink and float tests were carried out to evaluate the poss...

Iron Ore Rock Recognition Trials

Process capability improvement through DMAIC for aluminum alloy wheel machining

This paper first enlists the generic problems of alloy wheel machining and subsequently details on the process improvement of the identified critical-to-quality machining characteristic of A356 aluminum alloy wheel machining process. The causal factors are traced using the Ishikawa diagram and prioritization of corrective actions is done through process failure modes and effects analysis. Proce...

Recovery Improvement of Fine Iron Ore Particles by Multi Gravity Separation

Conventional gravity separation process of iron mineral fines is not very effective. In present work Multi Gravity Separation (MGS) process has been studied. This study was performed on a low-grade iron ore namely goethiticlateritic ore (GLO) from Eastern India. Detailed mineralogical, physical and chemical characteristics of a goethiticlateritic iron ore showed that the sample contained porous...

Effect of Using Oxygen-Enriched Gas during Induration Process of Iron Ore Pellets Containing Solid Fuel

In this research, the effects of oxygen injection during the induration process were studied in order to improve the quality specifications and increase the rate of production of the iron oxide pellets. Several experiments were carried out in palletizing pilot plant in different conditions of oxygen injection. The results suggested that if only the extra oxygen was injected into the furnace in ...