Iron-treated activated carbon fibers as NO adsorbents - Effect of the nature of activated carbon fibers.
نویسندگان
چکیده
منابع مشابه
Structural characterization of heat-treated activated carbon fibers
Raman scattering, x-ray diffraction, and BET measurements are used to study the effect of heat treatment on the microstructure of activated carbon fibers (ACFs) and to correlate the structural changes with the metal-insulator transition observed in the electronic transport properties of heat-treated ACFs. A sequence of events is identified, starting with desorption, followed by micropore collap...
متن کاملFABRICATION OF CARBON FIBERS FROM COMMERCIAL WET SPIN POLYACRYLONITRILE FIBERS
Carbon fibers are fabricated from different materials such as special polyacrylonitrile (PAN) fibers, cellulose fibers and pitch. But PAN fibers are recognized as the most widely used precursor for the present-day manufacture of carbon fibers. The process of fabrication carbon fibers from special PAN fibers is composed of two steps including oxidative stabilization at low temperature and carbon...
متن کاملElectrochemical Capacitive Desalination Behavior of Activated Carbon Fibers
Introduction Capacitive deionization (CDI), which is ion electrosorption onto the surface of porous materials to remove ions from aqueous solutions, may serve as an energy-efficient alternative for the desalination of brackish water comparing with conventional desalination methods such as membrane separation and thermal distillation [1]. The CDI process operates at low direct voltages. Ions ads...
متن کاملWindmill Palm (Trachycarpus fortunei) Fibers for the Preparation of Activated Carbon Fibers
Activated carbon fibers (ACFs) were prepared by steam activation of windmill palm (WP) (Trachycarpus fortunei) fibers in a nitrogen atmosphere at various temperatures in the 600 to 850 °C range, and their characteristics were investigated. The effects of temperature, in terms of porous texture and surface chemistry, were identified through the use of scanning electron microscopy (SEM), nitrogen...
متن کاملMesoporous Activated Carbon Fibers from Lignocelullosic Materials: Adsorption Studies
High surface area and highly mesoporous activated carbon fibers (ACF) were obtained by physical activation of natural precursors (vetiver roots and bagasse) with steam and chemical activation using phosphoric acid. The textural characteristics of the activated were determined by nitrogen adsorption study and mercury porosimetry and showed that interesting porosity were obtained (SBET up to 1600...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: NIPPON KAGAKU KAISHI
سال: 1985
ISSN: 2185-0925,0369-4577
DOI: 10.1246/nikkashi.1985.2315