Kinematic Analysis of a Partially Decoupled 3-DOF Parallel Wrist
نویسندگان
چکیده
منابع مشابه
Design and Kinematic Analysis of a 4-DOF Serial-Parallel Manipulator for a Driving Simulator
This paper presents the kinematic analysis and the development of a 4-degree-of-freedom serial-parallel mechanism for large commercial vehicle driving simulators. The degrees of freedom are selected according to the target maneuvers and the structure of human motion perception organs. Several kinematic properties of parallel part of the mechanism under study are investigated, including the inve...
متن کاملStructure Synthesis of 6-DOF 3-3 Decoupled Parallel Manipulators
In parallel manipulator design, usual 6-DOF PMs, like the Stewart platform, suffer from the disadvantages of difficult forward kinematics, coupled motion, and small workspace, so that the motion planing and control become very complicated and difficult to be implemented in real application. Most of the PMs with lower mobility are over-constrained when assembly errors are considered [1]. Therefo...
متن کاملKinematic calibration of a 3-DOF planar parallel robot
Purpose – The purpose of this paper is to describe a calibration method developed to improve the absolute accuracy of a novel three degrees-of-freedom planar parallel robot. The robot is designed for the precise alignment of semiconductor wafers and, even though its complete workspace is slightly larger, the accuracy improvements are performed within a target workspace, in which the positions a...
متن کاملArgos: A Novel 3-DoF Parallel Wrist Mechanism
This article presents a novel parallel spherical mechanism called Argos with three rotational degrees of freedom. Design aspects of the first prototype built of the Argos mechanism are discussed. The direct kinematic problem is solved, leading always to four nonsingular configurations of the end effector for a given set of joint angles. The inverse-kinematic problem yields two possible configur...
متن کاملKinematic and Dynamic Analysis of Tripteron, an Over-constrained 3-DOF Translational Parallel Manipulator, Through Newton-Euler Approach
In this research, as the main contribution, a comprehensive study is carried out on the mathematical modeling and analysis of the inverse kinematics and dynamics of an over-constraint three translational degree-of-freedom parallel manipulator. Due to the inconsistency between the number of equations and unknowns, the problem of obtaining the constraint forces and torques of an over-constraint m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Robotics
سال: 2015
ISSN: 1687-9600,1687-9619
DOI: 10.1155/2015/790414