L-Box Form Filling of Thixotropic Cementitious Paste and Mortar

Mechanical resilience and cementitious processes in Imperial Roman architectural mortar.

The pyroclastic aggregate concrete of Trajan's Markets (110 CE), now Museo Fori Imperiali in Rome, has absorbed energy from seismic ground shaking and long-term foundation settlement for nearly two millenia while remaining largely intact at the structural scale. The scientific basis of this exceptional service record is explored through computed tomography of fracture surfaces and synchroton X-...

Rate Sensitive Behavior of Cement Paste and Mortar in Compression

Durability of Mortar Incorporating Ferronickel Slag Aggregate and Supplementary Cementitious Materials Subjected to Wet–Dry Cycles

This paper presents the strength and durability of cement mortars using 0–100% ferronickel slag (FNS) as replacement of natural sand and 30% fly ash or ground granulated blast furnace slag (GGBFS) as cement replacement. The maximum mortar compressive strength was achieved with 50% sand replacement by FNS. Durability was evaluated by the changes in compressive strength and mass of mortar specime...

Predictive Models of Form Filling

In this paper we investigate predictive models of form filling. A predictive model of form filling aims to reduce the amount of time a user spends filling out a form by predicting the values of fields on the form and using these predictions to make suggestions to the form filler. Existing predictive models ignore both the values of other fields on the form and the values previously entered by u...

Mechanical Properties and Microstructure of Class C Fly Ash-Based Geopolymer Paste and Mortar

This paper presents workability, compressive strength and microstructure for geopolymer pastes and mortars made of class C fly ash at mass ratios of water-to-fly ash from 0.30 to 0.35. Fluidity was in the range of 145-173 mm for pastes and 131-136 mm for mortars. The highest strengths of paste and mortar were 58 MPa and 85 MPa when they were cured at 70 °C for 24 h. In XRD patterns, unreacted q...