Laboratory Tensile Strength Testing of Clay Soils using Direct Measurement
نویسندگان
چکیده
منابع مشابه
Direct mechanical measurement of the tensile strength and elastic modulus of multiwalled carbon nanotubes
We have conducted pulling and bending tests on individual carbon nanotubes in-situ in a transition electron microscope. Based on our observation of the force required to break the tube, a tensile strength of 0.15 TPa was computed. From corresponding bending studies on such nanotubes, the Young’s modulus was estimated to be 0.9 TPa (0.8 TPa after ‘sub continuum’ corrections). These results sugge...
متن کاملInvestigation on Tensile Strength of Friction Stir Welded Joints in PP/EPDM/Clay Nanocomposites
Polymer-based nanocomposites due to their advantages such as corrosion resistance,adequate mechanical properties and low cost are widely used in modern technologies. The increasing application of these nanocomposites, and hence their welding seems unavoidable. In this paper, a novel hottool in friction stir welding process is used for butt welding nanocomposite plates of 5 mm thick containing p...
متن کاملA New Approach for Measurement of Tensile Strength of Concrete
Tensile strength is one of the important strength parameters of concrete. Indirect methods have been used up till now for its measurement. These methods though widely accepted, do not furnish the true tensile strength of concrete. This paper presents a new approach for the experimental determination of true tensile strength of concrete. Results obtained by this test are quite encouraging and sh...
متن کاملNumerical study of strength mismatch in cross-weld tensile testing
The strength mismatch effect on the deformation behaviour of defect-free cross-weld tensile specimens, where there is a variation in strength along the length of the specimen, was investigated through 2D finite element analysis. A simple bi-material model, which is generally used in current engineering assessments (e.g. R6 “Assessment of the integrity of structures containing defects”) to exami...
متن کاملMeasurement of Compressive and Tensile Strength of Ice-silicate Mixtures
Introduction: Understanding the impact process of ice-silicate mixtures is of importance, because water ices exist mostly in a variety of forms of mixtures with silicate or some other components (e.g. ammonia) in the solar system. Decrease of crater volume with increasing silicate content was observed in our previous impact cratering experiments of ice-silicate mixture targets performed using a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Japanese Geotechnical Society Special Publication
سال: 2019
ISSN: 2188-8027
DOI: 10.3208/jgssp.v07.030