Laboratory Tests and Potential of Thermal Insulation Plasters
نویسندگان
چکیده
منابع مشابه
Lime-Pozzolan Plasters with Enhanced Thermal Capacity
A new type of lightweight plaster with the thermal capacity enhanced by PCM (Phase Change Material) addition is analyzed. The basic physical characteristics, namely the bulk density, matrix density, total open porosity, and pore size distribution are measured at first. For description of mechanical properties, compressive strength measurements are done. The thermal properties are characterized ...
متن کاملInterference in laboratory tests
Interference in clinical laboratory testing can create discrepancies in test results which can lead to patient harm. In clinical chemistry, interference is defined as a cause of medically significant difference in the measurand test result due to another component or property of the sample. Interference by endogenous and exogenous substances with assays for clinical analytes is a common prob...
متن کاملDetermination of the Thermal Resistance of Pipe Insulation Material from Thermal Conductivity of Flat Insulation Products
New European product standards now include a mandatory requirement for manufacturers to declare the temperature-dependent thermal conductivity for each insulation used in building equipments and industrial installations. For pipe insulation systems, the measurement is usually performed by a standard pipe test method, in which the value on a large temperature range is integrated to reduce temper...
متن کاملNUMERICAL TECHNIQUES FOR DIFFERENT THERMAL INSULATION MATERIALS
The objective of this work is to predict the temperature of the different types of walls which are Ferro cement wall, reinforced cement concrete (RCC) wall and two types of cavity walls (combined RCC with Ferrocement and combined two Ferro cement walls) with the help of mathematical modeling. The property of low thermal transmission of small air gap between the constituents of combine materials...
متن کاملThermal Properties of Advanced Aerogel Insulation
Buildings consume too much energy. For example, 16.6% of all the energy used in the United States goes towards just the heating and cooling of buildings. Many governments, organizations, and companies are setting very ambitious goals to reduce their energy use over the next few years. Because the time periods for these goals are much less than the average lifetime of a building, existing buildi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy Procedia
سال: 2015
ISSN: 1876-6102
DOI: 10.1016/j.egypro.2015.11.613