Laboratory Validation of Bridge Finite Model Updating Approach By Static Load Input/Deflection Output Measurements
نویسندگان
چکیده
منابع مشابه
Automated finite element model updating of a scale bridge model using measured static and modal test data
Department of Civil & Environmental Engineering, Tufts University, Medford, MA 02155, USA Department of Civil, Environmental, and Infrastructure Engineering, George Mason University, Fairfax, VA 22030, USA Department of Civil & Environmental Engineering, University of Alberta, Edmonton, Alberta, Canada Department of Civil, Environmental & Construction Engineering, University of Central Florida,...
متن کاملDAMAGE IDENTIFICATION OF TRUSSES BY FINITE ELEMENT MODEL UPDATING USING AN ENHANCED LEVENBERG-MARQUARDT ALGORITHM
This paper presents an efficient method for updating the structural finite element model. Model updating is performed through minimizing the difference of recorded acceleration of real damaged structure and hypothetical damaged structure, by updating physical parameters in each phase using iterative process of Levenberg-Marquardt algorithm. This algorithm is based on sensitivity analysis and pr...
متن کاملStudy on Finite Element Model Updating in Highway Bridge Static Loading Test Using Spatially-Distributed Optical Fiber Sensors
A finite model updating method that combines dynamic-static long-gauge strain responses is proposed for highway bridge static loading tests. For this method, the objective function consisting of static long-gauge stains and the first order modal macro-strain parameter (frequency) is established, wherein the local bending stiffness, density and boundary conditions of the structures are selected ...
متن کاملA NEW APPROACH BASED ON FINITE ELEMENT MODEL UPDATING FOR STRUCTURAL DAMAGE IDENTIFICATION
In this study, the finite element model updating was simulated by reducing the stiffness of the members. Due to lack of access to the experimental results, the data obtained from an analytical model were used in the proposed structural damage scenarios. The updating parameters for the studied structures were defined as a reduction coefficient applied to the stiffness of the members. Parameter v...
متن کاملFinite Element Model Updating of Scale Bridge Model Using Measured Modal Response Data AUTHORS
One of the most promising fields of finite element model updating involves using data obtained from the modal response of a structure to update a finite element model. The University of Central Florida (UCF) has constructed a scale model of a two span bridge. Using an impact hammer and accelerometers mounted on the structure, the first 17 natural frequencies and mode shapes were identified. Usi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korea institute for structural maintenance and inspection
سال: 2016
ISSN: 2234-6937
DOI: 10.11112/jksmi.2016.20.3.010