Laminar Craya–Curtet jets
نویسندگان
چکیده
منابع مشابه
Impinging laminar jets at moderate Reynolds numbers and separation distances.
An experimental and numerical study of impinging, incompressible, axisymmetric, laminar jets is described, where the jet axis of symmetry is aligned normal to the wall. Particle streak velocimetry (PSV) is used to measure axial velocities along the centerline of the flow field. The jet-nozzle pressure drop is measured simultaneously and determines the Bernoulli velocity. The flow field is simul...
متن کاملInteraction of Synthetic Jets with Laminar and Turbulent Boundary Layers
The interaction between circular synthetic jets and flat-plate laminar/turbulent boundary layers is investigated using CFD simulations in this study. For turbulent boundary layer simulations, large eddy simulation (LES) is applied so as to obtain more accurate flow details. The simulation results are validated using both existing experimental data and numerical results obtained from other resea...
متن کاملOn Steady Laminar Two-dimensional Jets in Compressible Viscous Gases Far behind the Slit*
A NOTE ON MY PAPER ON STEADY LAMINAR TWO-DIMENSIONAL JETS IN COMPRESSIBLE VISCOUS GASES FAR BEHIND THE SLIT* Quarterly of Applied Mathematics, 7, 313-323 (1949) By M. Z. KRZYWOBLOCKI (University of Illinois) Determination of the constant of integration for the temperature distribution (p. 317, eq. 25) from the condition that that total flux of enthalpy across jet is alike at all cross-sections ...
متن کاملProduction of Well-Controlled Laminar Aerosol Jets and Their Application for Studying Aerosol Combustion Processes
Generation of steady-state solid aerosol jets with controllable parameters is often necessary in experimental studies and industrial processes.Most of the current approaches use a uidizedbed to produce an aerosol owandalways introduce initial turbulence into the jet. Toproduce a laminar aerosol jet, ow straighteners and long tubes are used that make the design cumbersome and in exible. I...
متن کاملDesigning and Manufacturing the Multiple Jets Simulator and Experimental Investigation of the Multiple Jets in Crossflow
Designing and manufacturing the multiple jets simulator and experimental investigation of the multiple jets in crossflow at low velocity ratios have been studied Together with design and build a low-speed wind tunnel. A specific rake is used to determine the flow field pressure and changes in static pressure measured by pressure taps in the near field of the jets. There are generally three regi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Physics of Fluids
سال: 2004
ISSN: 1070-6631,1089-7666
DOI: 10.1063/1.1629300