Laser Additive Remanufacturing Cladding Thickness Detection System
نویسندگان
چکیده
Abstract As an important parameter in laser additive remanufacturing technology, cladding thickness is related to the quality of remanufacturing. Thickness detection during process can help improve and facilitate manual adjustment parameters real time optimize thickness. This system develops a set based on displacement sensor. The consists hardware software parts. part includes sensor, mounting plate, digital signal acquisition device system. data developed according Visual Studio. uses two methods measure, eliminates error caused by tilt factor worktable, realizes online measurement
منابع مشابه
Laser remanufacturing based on the integration of reverse engineering and laser cladding
Laser remanufacturing has been used as an approach to refurbish or to improve the surface quality of high-priced parts. However, most of the existing systems lack measuring and modelling functions, which results in the uncertainty of the quality of end products. This paper presents a three-dimensional Laser Remanufacturing System (LRS) based on the integration of reverse engineering and laser c...
متن کاملProgress and Challenges of Ultrasonic Testing for Stress in Remanufacturing Laser Cladding Coating
Stress in laser cladding coating is an important factor affecting the safe operation of remanufacturing components. Ultrasonic testing has become a popular approach in the nondestructive evaluation of stress, because it has the advantages of safety, nondestructiveness, and online detection. This paper provides a review of ultrasonic testing for stress in remanufacturing laser cladding coating. ...
متن کاملRemanufacture of turbine blades by laser cladding,machining and in-process scanning in a single machine
Remanufacturing Laser cladding Inspection Additive Manufacturing (AM) Adaptive machining Hybrid processing Repair Remanufacturing is one of the most efficient ways of recycling worn parts because it consumes only a fraction of the energy, cost, and material required for new parts. Remanufacture of engineering components typically entails serial labor intensive and operator skill sensitive proce...
متن کاملLaser-powder-material interactions in the laser cladding process
In this paper we present briefly two possible approaches for modelling the laser cladding process. The first approach is 2D and consists in finding the shape of the molten pool given the fraction of the laser power which is available at the surface of the workpiece and given the amount of powder sticking to the molten pool. The powder reaching the workpiece is assumed to melt instantaneously at...
متن کاملClosed Loop Control of 3d Laser Cladding
In this paper, a heat input closed-loop control system based on infrared image sensing for 3D laser cladding is introduced. A high frame-rate (up to 800 frames/s) camera is installed coaxially on the top of the laser-nozzle setup. Complete of the infrared images of the molten pool can be acquired with a short nozzle-substrate distance in different scanning directions, eliminating the noise from...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2022
ISSN: ['1742-6588', '1742-6596']
DOI: https://doi.org/10.1088/1742-6596/2395/1/012061