Laser-Bonding in High Power Electronics
نویسندگان
چکیده
منابع مشابه
emittance control in high power linacs
چکیده این پایان نامه به بررسی اثر سیم پیچ مغناطیسی و کاوه یِ خوشه گر با بسامد رادیویی بر هاله و بیرونگراییِ باریکه هایِ پیوسته و خوشه ایِ ذرات باردار در شتابدهنده های خطیِ یونی، پروتونی با جریان بالا می پردازد و راه حل هایی برای بهینه نگهداشتن این کمیتها ارایه می دهد. بیرونگرایی یکی از کمیتهای اساسی باریکه هایِ ذرات باردار در شتابدهنده ها است که تاثیر قابل توجهی بر قیمت، هزینه و کاراییِ هر شتابدهند...
High Power Laser Diode Driver Based on Power Converter Technology - Power Electronics, IEEE Transactions on
This paper describes the design of a high speed semiconductor laser diode driver designed for driving 500 mW to 1.5 W diodes at full optical power modulation up to frequencies of 10 MHz. The duty cycle of the modulation may be varied. A switching power-converter based current source allows a higher power delivery efficiency to the diode than in previous designs, allowing for a more modest power...
متن کاملHigh Frequency Electronics High Frequency Design RF POWER AMPLIFIERS
RF and microwave power amplifiers and transmitters are used in a wide variety of applications including wireless communication, jamming, imaging, radar, and RF heating. This article provides an introduction and historical background for the subject, and begins the technical discussion with material on signals, linearity, efficiency, and RF-power devices. At the end, there is a convenient summar...
متن کاملA Breakthrough in Power Electronics Reliability – New Die Attach and Wire Bonding Materials
Power Electronics on DCB are used for high power devices. There is a wide field of applications for such power electronic devices like converters or inverters for wind mills, solar parks or for electric and hybrid vehicles. High efficiency, long life time and increased power density are the major technical requirements for those devices. Especially the life time, but also the power density are ...
متن کاملHigh-Power Green Laser Sources
To access the green spectral range for display applications, high-power optically pumped semiconductor disk lasers (OPSDLs) in combination with second-harmonic generation have been realized. A frequency-doubled output exceeding 9.5W is achieved at a wavelength of 520 nm. The wavelength of these devices can be tuned over a rather broad range of more than 20 nm in the second-harmonic regime. In t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Laser Micro/Nanoengineering
سال: 2010
ISSN: 1880-0688
DOI: 10.2961/jlmn.2010.03.0012