Laser Cladding of MCrAlY Coatings on Stainless Steel
نویسندگان
چکیده
منابع مشابه
Mechanical and electrochemical properties of multiple-layer diode laser cladding of 316L stainless steel
In the present investigation, a detailed mechanical and electrochemical properties of multiple-layer laser clad 316L stainless steel (from the powders produced by gas atomized route) has been carried out. Multiple-layer laser cladding of 316 L stainless steel has been conducted using a diode laser. The mechanical property (microhardness) of the fabricated product has been evaluated using a micr...
متن کاملCharacterization of CrN/TiN PVD Coatings on 316L Stainless Steel
In order to further enhance tribological properties 316 Low carbon stainless steel (L SS) used on mechanical parts. CrN/TiN with DC magnetron sputtering sources was carried out on PVD 316 L SS. The micro structure of the CrN/TiN coatings were investigated by Scanning electron microscope (SEM), X-ray Diffraction (XRD) and tribology properties were investigated on a Pin on Disc friction and wear ...
متن کاملCharacterization of SiO2-TiO2 Coatings on 316l Stainless Steel Substrates
This paper reports nano-structured SiO2-TiO2 coatings using the sol-gel technique on 316L steel substrates. Nanoindentation, surface analysis and corrosion resistance tests were performed on different samples. The nanomechanical tests allowed to compare uncoated steel samples (Eavg = 193.24 GPa and mean hardness of 2.63 GPa and coated steel samples (Eavg = 287.38 GPa and mean hardness of 5.74 G...
متن کاملInfluence of Laser Ablation on Stainless Steel Corrosion Behaviour
Laser ablation is the method for material removing from a surface using pulsed lasers. It is used for surface structuring, laser drilling or laser marking. A change of the corrosion behavior of a base material caused by thermal effects during laser processing is an important problem of this technology. Possibilities of surface modification of stainless steel using laser ablation are presented i...
متن کاملSuper-hydrophobic multi-walled carbon nanotube coatings for stainless steel.
We have taken advantage of the native surface roughness and the iron content of AISI 316 stainless steel to directly grow multi-walled carbon nanotube (MWCNT) random networks by chemical vapor deposition (CVD) at low-temperature (1000°C) without the addition of any external catalysts or time-consuming pre-treatments. In this way, super-hydrophobic MWCNT films on stainless steel sheets were obta...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Physics Procedia
سال: 2014
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2014.08.172