Laser cleaning of paper: Cleaning efficiency and irradiation dose
نویسندگان
چکیده
منابع مشابه
Infrared steam laser cleaning
Steam Laser Cleaning with a pulsed infrared laser source is investigated. The infrared light is tuned to the absorption maximum of water (λ= 2.94 μm, 10 ns), whereas the substrates used are transparent (glass, silicon). Thus a thin liquid water layer condensed on top of the contaminated substrate is rapidly heated. The pressure generated during the subsequent phase explosion generates a cleanin...
متن کاملThe Efficiency of Ultrasonic Cleaning
ne01 themostcommoncausesof coating failure is inadequate surface preparation. Hence it is important to accuratelyassesstheefficiency of a cleaning technique prior to introducing it in a commercial operation. aecent developments in the cleaning of metallic surfaces ~ idethe use of aqueoussolutions that can beoperated at l i . Lemperatures to save energy. Some expensive organic Soivents that have...
متن کاملChapter 6 STEAM LASER CLEANING OF SILICON SURFACES: LASER-INDUCED GAS BUBBLE NUCLEATION AND EFFICIENCY MEASUREMENTS
The removal of dust particles from semiconductor surfaces requires new cleaning strategies such as Steam Laser Cleaning (SLC). It is based on laser-induced explosive evaporation of a liquid layer applied on the surface. We have investigated the laser-induced nucleation and growth of gas bubbles at silicon/water, silicon/isopropanol and silver-film/water interfaces by light scattering and surfac...
متن کاملFouling strategies and the cleaning system of NF membranes and factors affecting cleaning efficiency
Nanofiltration membranes play an important role in the desalination of brackish and seawater as well as membrane mediated waste water reclamation and other industrial separations. Fouling of nanofiltration (NF) membranes is typically caused by inorganic and organic materials present in water that adhere to the surface and pores of the membrane and results in deterioration of performance (reduce...
متن کاملCharacterization of Laser Cleaning of Artworks
The main tasks of conservators of artworks and monuments are the estimation and analysis of damages (present condition), object conservation (cleaning process), and the protection of an object against further degradation. One of the physical methods that is becoming more and more popular for dirt removal is the laser cleaning method. This method is non-contact, selective, local, controlled, sel...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Studies in Conservation
سال: 2015
ISSN: 0039-3630,2047-0584
DOI: 10.1179/0039363015z.000000000214