Laser Direct Etching on Transparent Conductive Oxide Films Sputtered on Polycarbonate Substrates
نویسندگان
چکیده
منابع مشابه
Transparent Conductive Oxide Thin Films
Transparent conductive oxides (TCO) have high optical transmission at visible wavelengths and electrical conductivity close to that of metals. They also reflect near infrared and infrared (i.e., heat) wavelengths, and are used in products ranging from energy efficient low-e windows to photovoltaics. One of their most important uses is for transparent electrical contacts. Virtually all applicati...
متن کاملDoped Zinc Oxide Thin Films as Transparent Conductive Electrodes
Sn doped ZnO thin films have been deposited on c-cut sapphire single crystal substrates at 200°C by pulsed electron beam deposition. The kinetic energies of the ions in the plasma plume determined from ion probe measurements, present a relatively broad distribution of the energies from a few eV to one hundred eV. Sn doped ZnO films have a graded composition, with a slightly in-depth variation o...
متن کاملResidual Stress in Cu Sputtered Films on Glass Substrates at Different Substrate Temperatures
Copper films of 300 nm thickness deposited by planar magnetron sputtering on glass substrates, for substrate temperatures between 300 and 500 K, and deposition rate of 10 ?s?1. Microstructure of these films was obtained by X-ray diffraction, while the texture mode of diffractometer was used for stress measurement by the sin2? technique. The components of the stress tensor are obtained using mea...
متن کاملFormation of Cupric Oxide Films on Quartz Substrates by Annealing the Copper Films
In the present work, cupric oxide (CuO) films were obtained through thermal annealing of the copper (Cu) films deposited on quartz substrates by DC magnetron sputtering method. The annealing was performed in air atmosphere for different times ranging from 60-240 min at temperature of 400 ºC. The influence of annealing times on structural and morphological properties of the films was investi...
متن کاملReduction of graphene oxide films on Al foil for hybrid transparent conductive film applications
We report the reduction of graphene oxide (G-O) films on Al foil using hydrogen as a reducing agent generated during the etching of Al foil in an aqueous solution of hydrochloric acid (HCl). Complete etching of the Al substrate results in simultaneous reduction and a free standing film composed of stacked and overlapped reduced graphene oxide (RG-O) platelets. Generation of hydrogen at the G-O/...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korean Institute of Electrical and Electronic Material Engineers
سال: 2014
ISSN: 1226-7945
DOI: 10.4313/jkem.2014.27.3.146