Laser Materials Fabrication and Joining
نویسندگان
چکیده
منابع مشابه
Design and Fabrication of Materials for Laser Shape Deposition Manufacturing
Shape Deposition Manufacturing (SDM) is a layered manufacturing technique, which uses sequential steps of material deposition and removal to form 3-D structures. A Nd-YAG laser is used to produce fully dense, near net shape multi-material deposits. However, residual stresses caused by the temperature gradient and material property mismatches result in part inaccuracy, warpage, or even delaminat...
متن کاملCombustion joining of refractory materials
This paper overviews heterogeneous exothermic reactive systems as they apply to the joining of materials. Techniques that are investigated fall under two general schemes: so-called Volume Combustion Synthesis (VCS) and Self-Propagating High-Temperature Synthesis (SHS). Within the VCS scheme, applications that are considered include Reactive Joining (RJ), Reactive Resistance Welding (RRW), and S...
متن کاملCeramic/metal joining for structures and materials
The paper presents a discussion of the various types of ceramic joining within a conceptual framework based on the fundamentals of wetting, adhesion, and the thermodynamics of interfacial reactions. Examples are given of solid state diffusion bonding of Pt to alumina and brazing of AlN. Most ceramic-metal bonding is conducted at high temperatures, where chemical reaction is to be expected. The ...
متن کاملMetal-ceramic joining by laser
Within the scope of increase in cutting tools efficiency, a CW CO;! laser beam has been used for butt welding sintered tips containing cobalt and tungsten carbide to a medium carbon steel core. After optimization of the laser processing conditions, full penetrating, sound and homogeneous welds are observed. Hardness is found to be nearly constant across the entire weld bead cross-section. Micro...
متن کاملDigital Materials for Digital Fabrication
Traditional fabrication techniques include pick-and-place, roll-to-roll, molding, patterning and more. Current research in fabrication includes algorithmic assembly [3] , programmed assembly[9], self-assembly[1,2] , assembly by folding [4] as well as guided self-assembly [2]. The above research studies the methods of assembly rather than the nature of the materials they are using for assembly. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2020
ISSN: 1996-1944
DOI: 10.3390/ma13122800