Laser Micro Fabrication Using Green Tape.
نویسندگان
چکیده
منابع مشابه
Fabrication of micro-axicons using direct-laser writing.
A novel direct-laser writing fabrication process for micro-axicons is demonstrated. A fiber-axicon-generated Bessel beam was utilized to write on UV-curable optical epoxy to form new axicons and axicon arrays, and geometrical parameters of the replicated epoxy axicons were analyzed in terms of both apex angle and proximity of the writing axicons. The shape of the fabricated axicons was demonstr...
متن کاملPicosecond laser ablation for silicon micro fuel cell fabrication
We have investigated laser ablation as a microfabrication approach to produce micro fuel cells (MFCs) in silicon. Picosecond pulses (15 ps) at a wavelength of 355 nm are used to make all of the MFC structures. To assess the benefits and drawbacks of laser ablation, reference cells have been produced by deep reactive ion etching (DRIE) using matching geometries. Ablated and etched cells have bee...
متن کاملMicro-layered-photolithography for Micro- Fabrication and Micro-molding
A novel process based on the principle of layered photolithography has been proposed and tested for making three-dimensional micro-structures. An experimental setup was designed and built for doing experiments on this micro-fabrication process. An ultraviolet (UV) excimer laser at the wavelength of 248 nm was used as the light source and a single piece of photo-mask carrying a series of two dim...
متن کاملFabrication of Wireless Micro Pressure Sensor Using the CMOS Process
In this study, we fabricated a wireless micro FET (field effect transistor) pressure sensor based on the commercial CMOS (complementary metal oxide semiconductor) process and a post-process. The wireless micro pressure sensor is composed of a FET pressure sensor, an oscillator, an amplifier and an antenna. The oscillator is adopted to generate an ac signal, and the amplifier is used to amplify ...
متن کاملFabrication of Tissue Scaffolds using Projection Micro- Stereolithography
In vitro liver models are a critical tool in pharmaceutical research, yet standard hepatocyte cultures fail to capture the complexity of in vivo tissue behavior. One of the most critical features of the in vivo liver is the extensive microvasculature which allows for the delivery of nutrients and metabolites without exposing hepatocytes to de-differentiating fluidic shear stresses. A new liver ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Precision Engineering
سال: 1998
ISSN: 1882-675X,0912-0289
DOI: 10.2493/jjspe.64.1340