Laser Trimming of Micro Mirror Devices
نویسندگان
چکیده
منابع مشابه
Resonance Frequency Trimming for MEMS Micro-Mirror Scanner
MEMS devices with harmonic oscillators resonating at specific frequency are useful in variety of applications. One of these applications that demands high and accurate resonant frequency is optical scanners for display applications. Due to the large tolerances of MEMS fabrication a calibration is required to achieve accuracy in resonance frequency. In this paper we present a novel technique for...
متن کاملNote: Suppression of kHz-frequency switching noise in digital micro-mirror devices.
High resolution digital micro-mirror devices (DMDs) make it possible to produce nearly arbitrary light fields with high accuracy, reproducibility, and low optical aberrations. However, using these devices to trap and manipulate ultracold atomic systems for, e.g., quantum simulation is often complicated by the presence of kHz-frequency switching noise. Here we demonstrate a simple hardware exten...
متن کاملFemtosecond laser micro-structuring and refractive index modification applied to laser and photonic devices
Rapid progress has been made in the last few years in the development direct-write, femtosecond laser micro-structuring and waveguide writing techniques in various materials, particularly semiconductor and other photo-sensitive glasses. There is considerable potential for this becoming a disruptive technology in photonic device fabrication, perhaps even leading to the development of devices tha...
متن کاملPhoto-patterning micro-mirror devices using azo dye-doped cholesteric liquid crystals.
A simple method for fabricating patternable micro-mirror devices by photo-induced alignment of dye-doped cholesteric liquid crystal (CLC) is demonstrated. The CLC texture can be changed from random distribution to nearly perfect planar by the photo-excited adsorbed dyes. This structure transformation leads to a substantial reflectivity increase. Using this photo-patterning technique, one- and t...
متن کاملLaser-diode-pumped Nd:YAG active-mirror laser.
We describe a simple design, laser-diode-pumped cw Nd:YAG active-mirror laser and present a thermal analysis of the crystal. A cw output power of 2.4 W and an M(2) beam quality value of less than 1.9 at an incident pumping power of 8.9 W were obtained. From the thermal analysis we predict that the output power can be increased by increasing the pump beam diameter and the pump power at a constan...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Laser Technik Journal
سال: 2008
ISSN: 1613-7728,1863-9119
DOI: 10.1002/latj.200790204