Lead and zinc selective precipitation from leach electric arc furnace dust solutions

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A KINETIC STUDY ON THE CARBOTHERMIC REDUCTION OF ZINC OXIDE FROM ELECTRIC ARC FURNACE DUST

In the present study, reduction of zinc oxide from the pellets made of steelmaking electric arc furnace dust has been investigated. Effects of such parameters as the type of carbon material (graphite, coke and charcoal) as well as time and temperature on the reduction reaction have been examined. The reduced (dimensionless) time method was applied to perform a kinetic analysis of the system. Ex...

متن کامل

Kinetics of the Volatilization Removal of Lead in Electric Arc Furnace Dust

The selective removal of lead and chlorine with minimizing zinc loss from electric arc furnace (EAF) dust is very important in the process for recovering high purity zinc from the EAF dust by high temperature metal recovery (HTMR) processes. In this study, the volatilization reaction of lead contained in the EAF dust was investigated at reaction temperatures between 973 and 1223K in air. The ma...

متن کامل

Potential Reuse of Electric-Arc Furnace Dust (EAFD) in Concrete

This study investigated electric arc furnace dust (EAFD) reuse as a raw material in concrete mixes. A comprehensive experimental program consisting of two phases of testing was carried out. The first phase included the replacement of ordinary Portland (Type I) cement by unsieved dust with the percentages of 0, 2.5, 5, 7.5 and 10%. The second phase included the replacement of quartz (filler) by ...

متن کامل

Electric Arc Furnace Slag and Blast Furnace Dust, Use for the Manufacture of Asphalt Concrete for Roads

This paper analyzes how feasible it is to use electric arc furnace slag as coarse aggregate, and blast furnace dust as fine aggregate in the manufacture of hot asphalt concrete for roads. Three mixtures were designed using the Ramcodes methodology, the M1 mixture of control with conventional materials, the M2 mixture replacing 50% and the M3 mixture replacing 100% of the conventional aggregates...

متن کامل

Investigation of Possible Usage of Electric Arc Furnace Dust in Cement Industry

Synopsis-In this research, possible usage of EAF dust on cement is investigated. Therefore, effects of addition of different percentages of EAF dust on the most important properties of cement such as hydration heat, water coefficient, viscosity, initial and final setting times, strength development and leachability of heavy metals were studied. Results showed that EAF dust alters the characteri...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Matéria (Rio de Janeiro)

سال: 2007

ISSN: 1517-7076

DOI: 10.1590/s1517-70762007000300011