Li2ZnTi3O8/graphene nanocomposite as a high-performance anode material for lithium-ion batteries
نویسندگان
چکیده
منابع مشابه
Porous TiO2/C nanocomposite shells as a high-performance anode material for lithium-ion batteries.
Porous TiO2/C nanocomposite shells with high capacity, excellent cycle stability, and rate performance have been prepared. The synthesis involves coating colloidal TiO2 nanoshells with a resorcinol-formaldehyde (RF) layer with controllable thickness through a sol-gel-like process, and calcining the composites at 700 °C in an inert atmosphere to induce crystallization from amorphous TiO2 to anat...
متن کاملSynthesis of Hard Carbon- Silicon Nanocomposite as Anode Active Material for Lithium-Ion Batteries
In this research, using phenolic resin as the precursor of carbon and various amounts of ethylene glycol as a pore former, porous samples of hard carbon were synthesized. Samples were characterized by x-ray diffraction (XRD) and N2 adsorption-desorption methods. Broad diffraction peaks represent the amorphous structure of samples. Moreover, the gas adsorption-desorption curves showed that the a...
متن کاملSuperior storage performance of a Si@SiOx/C nanocomposite as anode material for lithium-ion batteries.
Rechargeable lithium-ion batteries are essential to portable electronic devices. Owing to the rapid development of such equipment there is an increasing demand for lithium-ion batteries with high energy density and long cycle life. For high energy density, the electrode materials in the lithium-ion batteries must possess high specific storage capacity and coulombic efficiency. Graphite and LiCo...
متن کاملInitial Discharge Capacity of Manganese Cobaltite as Anode Material for Lithium Ion Batteries
Nanostructured manganese cobalt oxide spinel (MnCo2O4) are prepared by co-precipitation method and calcined at 650 and 750°C. Morphological studies show that by increasing the calcination temperature from 650 to 750°C, morphology of the particles changes from quasi-plate to polyhedral. The MnCo2O4 calcined at 650°C could deliver an initial discharge capacity of 1438 mAh g-1 under current densit...
متن کاملPreparation of a porous Sn@C nanocomposite as a high-performance anode material for lithium-ion batteries.
A porous Sn@C nanocomposite was prepared via a facile hydrothermal method combined with a simple post-calcination process, using stannous octoate as the Sn source and glucose as the C source. The as-prepared Sn@C nanocomposite exhibited excellent electrochemical behavior with a high reversible capacity, long cycle life and good rate capability when used as an anode material for lithium ion batt...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: RSC Advances
سال: 2018
ISSN: 2046-2069
DOI: 10.1039/c8ra05893h