Limit Strain Characterization in an Aluminum Die-Quenching Process
نویسندگان
چکیده
منابع مشابه
On the optimum die angle in rod drawing process considering strain-hardening effect of material
In this paper, rod drawing process of strain-hardening materials is investigated by analytical, numerical and experimental methods. The classic upper bound solution, based on the assumption of perfect plasticity, has been extended to consider the work-hardening of the material during the drawing process. For a given process conditions and mechanical properties of the rod material, the power ter...
متن کاملEvaluation of Forging Strain for Maximum Grain Size in Open-Die Forged 6061 Aluminum
In an effort to maximize grain growth of open-die forged 6061 aluminum alloy parts, samples from three of Weber Metals’s suppliers (Hidal Co-Almex USA Inc., TST Inc., and Vista Metals Corp.; to be called Supplier H, Supplier T, Supplier V respectively) were cut into cylinders with diameters of 0.75 ̋ and heights of 2 ̋, and put through a simulated forging process and heat treatment. It is possibl...
متن کاملQuenching stress, quenching current and plastic strain in superconductors
mechanical stress and maximum superconducting current have been calculated for a superconductor subjected to uniform plastic deformation. The training effect due to strain hardening o f the material is discussed. These results are compared with an analogous case when the normal transition is caused by the thermo-magnetomechanical instability. The quenching current is shown to depend on the hist...
متن کاملAluminum extrusion with a deformable die
In aluminum extrusion, a work-piece (billet) is pressed through a die with an opening that closely resembles the desired shape of a profile. By this process, long profiles with an enormous variety of cross-sections can be produced to serve different markets such as building, construction and transport industry. When the shape of a profile does not conform to the specifications defined by the cu...
متن کاملController for a high strain shape memory alloy actuator: quenching of limit cycles
Further development of a three level switching controller [3] is presented. The controller was originally designed to drive a novel Shape Memory Alloy (SMA) actuator consisting of a number of thin NiTi bers woven in a counter rotating helical pattern around supporting disks. While the original controller performed satisfactorily, it was hampered by the presence of limit cycles at higher gains. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2018
ISSN: 1757-899X
DOI: 10.1088/1757-899x/418/1/012035