Liquid film thickness behaviour within a large diameter vertical 180° return bend

Liquid film condensation along a vertical surface in a thin porous medium with large anisotropic permeability

The problems of steady film condensation on a vertical surface embedded in a thin porous medium with anisotropic permeability filled with pure saturated vapour are studied analytically by using the Brinkman-Darcy flow model. The principal axes of anisotropic permeability are oriented in a direction that non-coincident with the gravity force. On the basis of the flow permeability tensor due to t...

Thickness of residual wetting film in liquid-liquid displacement.

Core-annular flow is common in nature, representing, for example, how streams of oil, surrounded by water, move in petroleum reservoirs. Oil, typically a nonwetting fluid, tends to occupy the middle (core) part of a channel, while water forms a surrounding wall-wetting film. What is the thickness of the wetting film? A classic theory has been in existence for nearly 50 years offering a solution...

Liquid Film Thickness Estimation using Electrical Capacitance Tomography

In air/oil lubrication systems, the flow parameters, e.g., flow pattern, liquid film thickness, and air/oil flow rate, are of great importance to the transportation efficiency. In most cases, the on-going two-phase flow is annular flow with the oil moving along the tube wall and the air travelling at high speed in the center. This usually results in the formation of a thin oil film, the thickne...

Characterization of Liquid Film Thickness in Slug-Regime Microchannel Flows

An experimental investigation is conducted to examine the effects of operating conditions and channel size on the liquid film thickness of vapor bubbles in adiabatic air-water flows within the slug flow regime. Acrylic test sections are fabricated to contain a single microchannel of square cross-section with hydraulic diameters of 510 μm and 1020 μm. High-speed visualizations are used to map th...

Analysis of Laminar Film Condensation on a Vertical Plate