Liquid Phase Diffusion Bonding of Rene80 Using Pure Boron
نویسندگان
چکیده
منابع مشابه
Bonding in Boron Hydrides
Unique preferred localized valence structures for B2H6, B4H10, B5H,, and B6H10 have been found from accurate self-consistent field wavefunctions by maximizing Coulomb repulsions of electron pairs within orbitals. Objective evidence has thus been obtained for two-centre BH, three-centre bridge BHB, two-centre BB and central three-centre BBB bonds, but not, as yet, for open three-centre BBB bonds...
متن کاملTransient liquid phase bonding of AISI 304L stainless steels with the austenitic and martensitic microstructures
In the present study, the effect of time and base metal microstructure on the Transient Liquid Phase (TLP) bonding of 304L stainless steel was studied. TLP was performed at 1050 0C for 5 and 60 minutes on the coarse grain austenitic and martensitic microstructure using BNi-2 interlayer. To prepare martensitic microstructure, as-received 304L was rolled at -15 0C up to 80% rolling reduction. TEM...
متن کاملTransient liquid phase bonding of AISI 304L stainless steels with the austenitic and martensitic microstructures
In the present study, the effect of time and base metal microstructure on the Transient Liquid Phase (TLP) bonding of 304L stainless steel was studied. TLP was performed at 1050 0C for 5 and 60 minutes on the coarse grain austenitic and martensitic microstructure using BNi-2 interlayer. To prepare martensitic microstructure, as-received 304L was rolled at -15 0C up to 80% rolling reduction. TEM...
متن کاملLow Temperature Transient Liquid Phase Bonding of Ti-6AI-4V
Transient liquid phase bonds can be made at low temperatures in vacuum using zinc inderlayers. The resulting microstructure is interface free with no detection of zinc by X-ray flourenscence, after 4 hours at 800°C The mechanical properties of the joint are at least one third of the parent metal. The process relies on evaporation, diffusion and intermetallic reaction of the zinc with the titan...
متن کاملLiquid Density Modeling of Pure Refrigerants Using Four Lattice-Hole Theory Based Equations of State
The present study investigates the performance and relative accuracy of four lattice-hole theory based equations of state in modeling and correlating the liquid density of pure refrigerants. Following the gathering of a database of 5740 experimental liquid density datapoints of 36 pure refrigerants belonging to five different categories including CFCs, HCFCs, PFCs, HFCs and HFEs, ranging from 6...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Transactions, JIM
سال: 1996
ISSN: 0916-1821,2432-471X
DOI: 10.2320/matertrans1989.37.1008