Liquid phase sintered SiC. Processing and transformation controlled microstructure tailoring
نویسندگان
چکیده
منابع مشابه
Microstructure Evolution and Mechanical Properties Improvement in Liquid-Phase-Sintered Hydroxyapatite by Laser Sintering
CaO-Al₂O₃-SiO₂ (CAS) as a liquid phase was introduced into hydroxyapatite (HAp) to prepare bone scaffolds. The effects of the CAS content (1, 2, 3, 4 and 5 wt%) on microstructure and mechanical properties of HAp ceramics were investigated. The optimal compression strength, fracture toughness and Vickers hardness reached 22.22 MPa, 1.68 MPa·m1/2 and 4.47 GPa when 3 wt% CAS was added, which were ...
متن کاملMicrostructure and Properties of Spark Plasma Sintered Aluminum Containing 1 wt.% SiC Nanoparticles
The low hardness and strength of aluminum, which limits its use in many industrial applications, could be increased through the addition of nanoparticles. However, the appropriate processing method and parameters should be carefully selected in order to achieve the desired improvement in properties. In this work, aluminum was reinforced with low weight fraction (1 wt.%) of SiC nanoparticles and...
متن کاملInvestigating the effects of Magnesia addition on properties, phase transformation and microstructure of gelcasted Zirconia bodies
Magnesia Partially Stabilized Zirconia (Mg-PSZ) is the best material for casting nozzles used in steelmaking industry due to high melting point, high mechanical strength, high thermal shock resistance, high toughness, chemical stability and neutrality, which these nozzles should be fabricated using cold isostatic pressing (CIP) method, however wet processing methods such as gelcasting can lead ...
متن کاملMicrostructure of spark plasma sintered TiB2 and TiB2–AlN ceramics
In this research study, the effects of aluminum nitride (AlN) additive on the densification behavior and microstructure development of titanium diboride (TiB2) based ceramic matrix composite were investigated. In this way, a monolithic TiB2 ceramic and a TiB2–5 wt% AlN ultrahigh temperature ceramic composite were fabricated by spark plasma sintering (SPS) proces...
متن کاملMicrostructure and Phase Composition of Cold Isostatically Pressed and Pressureless Sintered Silicon Nitride.
The microstructure and physical properties of new Y2O3 and Al2O3 oxide-doped silicon nitride ceramics fabricated by cold isostatic pressing and free sintering were investigated. The phase composition of produced material was also studied by X-ray diffraction at room and elevated temperature. The fabricated ceramics featured a microstructure of Si5AlON7 grains with a fine-grained α-Si3N4 with a ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research
سال: 2000
ISSN: 1516-1439
DOI: 10.1590/s1516-14392000000400007