Liquid–liquid transition in a strong bulk metallic glass-forming liquid
نویسندگان
چکیده
منابع مشابه
Strain rate induced crystallization in bulk metallic glass-forming liquid.
We report on the solidification of Au49, Ag5.5, Pd2.3, Cu26.9, Si16.3 bulk metallic glass under various strain rates. Using a copper mold casting technique with a low strain rate during solidification, this alloy is capable of forming glassy rods of at least 5 mm in diameter. Surprisingly, when the liquid alloy is splat cooled at much higher cooling rates and large strain rates, the solidified ...
متن کاملLiquid-to-glass transition in bulk glass-forming Cu60Ti20Zr20 alloy by molecular dynamics simulations.
We report results from molecular dynamics studies concerning the microscopic structure and dynamics of the ternary, bulk metallic glass-forming Cu60Ti20Zr20 alloy. In detail we consider the partial radial distribution functions, nearest-neighbor numbers, specific heat, simulated glass temperature, diffusion coefficients, and incoherent intermediate scattering function (ISF). The applied atomic ...
متن کاملIsoconfigurational elastic constants and liquid fragility of a bulk metallic glass forming alloy.
Samples of Zr(46.25)Ti(8.25)Cu(7.5)Ni(10)Be(27.5) were isothermally annealed and quenched near the glass transition temperature and studied by the pulse-echo overlap technique. The shear modulus G of the samples shows a strong reversible dependence on annealing temperatures and, thus, on the specific configurational potential energy of the equilibrium liquid. The low-T dependence of G of the co...
متن کاملThe viscosity of the Zr46.75Ti8.25Cu7.5Ni10Be27.5 bulk metallic glass forming alloy in the supercooled liquid
The viscosity of the Zr46.75Ti8.25Cu7.5Ni10Be27.5 bulk metallic glass forming alloy in the supercooled liquid was measured using parallel plate rheometry. The measurements were carried out with different heating rates between 0.0167 and 1.167 K/s as well as isothermally. Because of the high thermal stability above the glass transition of this bulk metallic glass former with respect to crystalli...
متن کاملSteady-state tensile viscous flow forming of bulk metallic glass
Tensile viscous flow is explored as a forming method for metallic glasses in their supercooled liquid temperature region. Bulk amorphous preforms with nominal alloy composition Zr55Cu30Al10Ni5 were produced by arc melting and tiltand suction casting into a copper mould. A simple loading rig, in which the preform is suspended from a wire, combined with selective heating of the section to be defo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nature Communications
سال: 2013
ISSN: 2041-1723
DOI: 10.1038/ncomms3083