Load Characteristics of the Polyphase Multivibrator

Micromachined Hydraulic Astable Multivibrator

1 Abstract The paper presents a hydraulic astable multivibrator system. The system consists of hydraulic resistors, hydraulic capacitors and hydraulic pressure controlled valves. The system is designed, realised and tested. The measured system behaviour agrees well with the model simulations. The free running frequency of the multivibrator is 0.18 Hz and the output pressure swing is 90% of the ...

Analysis of EMI effects on Monostable Multivibrator

Abstract: Electromagnetic interference (EMI) has a negative effect upon the performance of circuit communication systems. The present study considers the case of EMI and it is shown that the harmonic noise increases with an increasing interference amplitude and frequency. When electromagnetic interference takes place with the input pins of 555 Timer using as an Monostable Multivibrator it can c...

Comparison of the load-sharing characteristics

Recently, numerous types of posterior dynamic stabilization (PDS) devices have been introduced as an alternative to the fusion devices for the surgical treatment of degenerative lumbar spine. It is hypothesized that the use of ‘compliant’ materials such as Nitinol (Ni–Ti alloy, elastic modulus = 75 GPa) or polyether-etherketone (PEEK, elastic modulus = 3.2 GPa) in PDS can restore stability of t...

The Spatial Characteristics of Load Instructions

Relatively little background work has been done to examine the miss behavior of all static and dynamic load instructions, especially in the context of the entire program. This study addresses this gap in knowledge by presenting the whole-program (as opposed to sampling) profiling results for load behavior. Specifically, this study confirms the conclusion of previous work in that a very small pe...

Performance Characteristics of a Load