Load Distribution for Tube in Tube Structural System.(Dept.C)
نویسندگان
چکیده
منابع مشابه
Selecting Optimal Dimensions of Internal Tube in Tube-in-Tube Structural Systems Based on Structural Parameters
Tubular structural systems are one of the most common types of systems in high-rise structures. In the early days of this system, there were imperfections in its design which were overcome over time. The most important modification to rectify these defects is the use of a series of internal frames in addition to the peripheral frames and new systems in the center of the plan to eliminate design...
متن کاملA CLOSED FORM SOLUTION FOR FREE VIBRATION ANALYSIS OF TUBE-IN-TUBE SYSTEMS IN TALL BUILDINGS
In this paper the dynamic response of tube-in-tube systems for tall building structures is investigated. Inner and outer tubes are modeled using equivalent continuous orthotropic membranes; in which, each tube is individually modeled by a cantilever box beam. By applying the compatibility conditions on deformation of the two tubes, the governing dynamic equations of the tube-in-tube structure a...
متن کاملTube-Load Model Parameter Estimation for Monitoring Arterial Hemodynamics
A useful model of the arterial system is the uniform, lossless tube with parametric load. This tube-load model is able to account for wave propagation and reflection (unlike lumped-parameter models such as the Windkessel) while being defined by only a few parameters (unlike comprehensive distributed-parameter models). As a result, the parameters may be readily estimated by accurate fitting of t...
متن کاملNumerical and Experimental Study of Residual Stress Measurement and Thickness Distribution of T-shape Steel Tube Produced by Tube Hydroforming
Tube hydroforming (THF) process is used to produce the complex components from the initial cylindrical tubes. In this paper, T- shape component was formed using a tube hydroforming machine and the residual stresses of hydroformed tube was determined by hole drilling method. Subsequently, the thickness distribution and residual stresses of final tube were investigated using experimental and fini...
متن کاملTube Temperature Distribution in Water Tube Boiler- A Parametric Study by Finite Element Method
This paper presents the application of finite element method (FEM) to analyze the tube temperature distribution in a water tube boiler. Two-dimensional (2-D) finite element models are developed where the axi-symmetric triangular elements for the cross section area along the water tube are applied in computer software namely MSC Patran-Nastran. The analysis of the temperature distribution for ev...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MEJ. Mansoura Engineering Journal
سال: 1994
ISSN: 2735-4202
DOI: 10.21608/bfemu.2021.164316