Loading-unloading contact law for micro-crystalline cellulose particles under large deformations
نویسندگان
چکیده
منابع مشابه
Reactive Liftoff of Crystalline Cellulose Particles
The condition of heat transfer to lignocellulosic biomass particles during thermal processing at high temperature (>400 °C) dramatically alters the yield and quality of renewable energy and fuels. In this work, crystalline cellulose particles were discovered to lift off heated surfaces by high speed photography similar to the Leidenfrost effect in hot, volatile liquids. Order of magnitude varia...
متن کاملEffect of Contact Deformations on the Adhesion of Particles
A strict theory of reciprocal influence of the contact deformation and molecular attraction of a ball and a plane has been developed. It has been shown that despite the van der Waals' forces being capable of increasing the elastic contact area between the ball and the plane, the force that is required to overcome the molecular forces arising when the contact is broken does not increase thereby....
متن کاملContact Problem for Bonded Nonhomogeneous Materials under Shear Loading
The present paper examines the contact problem related to shear punch through a rigid strip bonded to a nonhomogeneous medium. The nonhomogeneous medium is bonded to another nonhomogeneous medium. The strip is perpendicular to the y-axis and parallel to the x-axis. It is assumed that there is perfect bonding at the common plane surface of two nonhomogeneousmedia. Using Fourier cosine transforms...
متن کاملA continuum model for nonlinear lattices under large deformations
A continuum model is developed for hexagonal lattices, composed of a set of masses connected by linear axial and angular springs, with nonlinearity arising solely from geometric effects. For a set of lattice parameters, these lattices exhibit complex deformation patterns under uniform loading conditions due to instabilities. A continuum model accounting for these instabilities is developed from...
متن کاملTwo-machine robotic cell considering different loading and unloading times
In this paper, the researchers have investigated a Concatenated Robot Move (CRM) sequence problem and Minimal Part Set (MPS) schedule problem with different setup times for two-machine robotic cell. They have focused on simultaneous solving of CRM sequence and MPS schedule problems with different loading and unloading times. They have applied a Simulated Annealing (SA) algorithm to provide a go...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mechanics Research Communications
سال: 2019
ISSN: 0093-6413
DOI: 10.1016/j.mechrescom.2019.06.004