Locating scatterers while drilling using seismic noise due to tunnel boring machine
نویسندگان
چکیده
منابع مشابه
Tunnel boring machine positioning automation in tunnel construction
Purpose Tunnel construction using a tunnel boring machine (TBM) entails precise machine positioning and guidance in the underground space. In contrast to traditional laser-based machine guidance solutions, the proposed research aims to develop an automation alternative to facilitate TBMguidance and as-built tunnel alignment survey during tunnelling operations. Method A fully automated system is...
متن کاملSimulation of tunnel boring machine utilization: A case study
Utilization is one of the main managerial factors that is applied for construction process analysis well. It directly affects the project duration and construction costs. Therefore, a utilization study in tunneling projects is essential. In this work, the utilization of an earth pressure balance Tunnel Boring Machine (TBM) in Tabriz urban railway project was studied using the Monte Carlo simula...
متن کاملthe reliability of a tunnel boring machine
greater levels of complexity in tunnelling with tunnel boring machine (tbm) allow higher chances of failures that may increase the potential hazardous risks. this paper presents the results of a study on tbm reliability using risk analysis. machinery failure mode and effect analysis was applied to analyze the risks of a tbm using qs9000 and sae.j1739 recommendations. for this purpose, 48 failur...
متن کاملSimulation Analysis of Rock Braking Mechanism of Tunnel Boring Machine
Original scientific paper Aiming at answering the questions of wear and failure of hob in the rock breaking process, the rock breaking process was simulated in different broken rock conditions by using finite element method. The relationship between normal force, lateral force, rolling force and time was obtained by rock breaking simulation analysis on the single edge disc cutter. The rock stre...
متن کاملMachine Tool Design and Static Behaviour Analisys Case of Study for a Drilling and Boring Machine
1. SOLID MODEL The main aim of the 3D design is to obtain a system that is very close to the real model considering the imposed functional conditions. In the machine tool design the parts are calculated for a proper strength and the stress level in each part is imposed to do not exceed material accepted values. A machine tool, particularly one that is used for drilling and boring processes (Fig...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Applied Geophysics
سال: 2018
ISSN: 0926-9851
DOI: 10.1016/j.jappgeo.2018.03.017