Lorentz Force Actuated Tunable-Focus Liquid Lens
نویسندگان
چکیده
منابع مشابه
Tunable - Focus Liquid Crystal Lens
Since liquid crystal (LC) was proposed for making a tunable lens, the LC based zoom lens has been studied extensively for machine vision, photonics, information processing and eye glasses. Various approaches for making LC tunable lenses exists. Among them three methods are presented in this seminar: flat LC spherical lenses, microlenses made of nanosized polymer dispersed LC and Fresnel type sw...
متن کاملTunable-focus liquid lens controlled using a servo motor.
We demonstrated a liquid lens whose focal length can be controlled by an actuator. The lens cell is composed of elastic membrane, planar glass plate, a periphery sealing ring, and a liquid with a fixed volume in the lens chamber. Part of the periphery sealing ring is excavated to form a hollow chamber which functions as a reservoir. This hollowed periphery is surrounded by an exterior rubber me...
متن کاملTunable Focus Liquid Lens with Radial-Patterned Electrode
A dielectric liquid lens is prepared based on our previous work. By optimizing the device structure, the liquid lens presents a converging focus with good resolution and changes its focal length over a broad range with a low driving voltage. For a liquid lens with „2.3 mm diameter in the relaxed state, it can resolve „40 lp/mm. The resolution does not degrade during focus change. Its focal leng...
متن کاملVariable-focus liquid lens.
A variable-focus liquid lens using a transparent flat cell is demonstrated. The top substrate has an aperture which is sealed with a thin elastic membrane on the outer surface and the bottom aperture is sealed on the inner surface of the bottom substrate. By applying a pressure to the outer membrane inward causes the liquid to redistribute and swell the inner membrane outward which, in turn, fo...
متن کاملAdaptive liquid lens actuated by photo-polymer.
An adaptive liquid lens actuated by a photo-polymer is demonstrated. The lens cell consists of a top glass substrate and a bottom plastic slab with two holes: reservoir hole and lens hole, which are sealed with elastic membranes. A photo-sensitive polymer is attached to the membrane of the reservoir hole. Under blue light irradiation, the polymer is bent which exerts a pressure to regulate the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Micromachines
سال: 2019
ISSN: 2072-666X
DOI: 10.3390/mi10100714