Lossless Multiway Power Combining and Outphasing for High-Frequency Resonant Inverters
نویسندگان
چکیده
منابع مشابه
Power Frequency Inverters for High Voltage Tests
The essential demand in high AC voltage testing is the availability of a test voltage with high quality, which is variable in amplitude and frequency. The power supply should not have any influence on the measurements – even the PDmeasurement and should be able to control a fault of the test objects insulation safely. These demands can be fulfilled using modern IGBT inverters. Two level voltage...
متن کاملOutphasing Control of Gallium N itride based Very High Frequency Resonant Converters 2015
In this paper an outphasing modulation control method suitable for line regulation of very high frequency resonant converters is described. The pros and cons of several control methods suitable for very high frequency resonant converters are described and compared to outphasing modulation. Then the modulation technique is described and the design equations given. Finally a design example is giv...
متن کاملDesign Characteristics of High-Power PV Inverters
While high-power PV installations certainly vary in configuration, a typical commercially installed system (Figure 1) consists of the following: • PV modules stacked in strings not to exceed 600 V open-load, referenced to ground on either positive or negative leg • A UL1741-certified inverter whose function, in addition to converting direct current to alternating current, is to act as an autono...
متن کاملOUTPHASING TRANSMITTER An Outphasing Transmitter Using Class - E PAs and Asym - metric Combining : Part
H igh efficiency linear amplification is of great interest in modern communication systems as it increases talk time, decreases power consumption , decreases heat dissipation, and improves reliability. The efficiency of linear power amplifiers (PAs) is highest at the peak output power (PEP) and decreases significantly for low amplitudes, as shown in Figure 1. Signals with time-varying amplitude...
متن کاملLossless, Passive Soft Switching Methods for Inverters and Amplifiers
This paper proposes new lossless passive soft switching methods for inverters developed from a synthesis procedure applicable to all PWM converters. The lossless passive soft-switching converter properties and synthesis procedure are described and extended here for inverters. Promising half-bridge and full-bridge soft-switching inverter examples are shown from the synthesis results. The voltage...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Power Electronics
سال: 2014
ISSN: 0885-8993,1941-0107
DOI: 10.1109/tpel.2013.2264773