Low Carbon Steels
نویسندگان
چکیده
منابع مشابه
an investication into the strain aging of low carbon steels
in this paper, the effect of prestrain on strain aging of low carbon steels, in the temperatures of 100°c and 200°c and the aging time of 50 minutes, and also the effect of aging temperature on strain aging in a constant aging time and prestrain, are investigated. the results of experiments show that with increasing the amount of prestrain, the increase in yield stress and ultimate tensile stre...
متن کاملAN INVESTIGATION TO BAINITE FORMATION MORPHOLOGIES IN NI-CR BEARING LOW CARBON STEELS THROUGH THERMOMECHANICAL PROCESSING
The presence of bainite in the microstructure of steels to obtain a proper combination of strength and toughness has always been desired. The previous works however have shown that the presence of preferred bainite morphologies in the microstructure of any steel would not be readily accessible. In addition, the appearance of different bainite morphologies in the microstructure of any steel is d...
متن کاملCarbon Analysis in Low-alloy and Carbon Steels with Handheld LIBS
Presented here is a method to analyze carbon content in low alloy and carbon steels, utilizing the technique of handheld laser induced breakdown spectroscopy (HH LIBS). The method specifies the SciAps Z-200, the world’s only handheld analyzer capable of analyzing carbon content in alloys. The Z-200 uses a pulsed, 1064 nm laser, operating at 5.5 mJ/pulse and 50 Hz repetition rate. The onboard sp...
متن کاملMathematical Modeling of the α→γ Phase Transformation during Heating in Low Carbon Steels
The purpose of this research is to develop a model for the ferrite-to-austenite transformation on heating which would include the possibility of the change in the character of the transformation from diffusional to mixed-mode and would be less computationally demanding. A physics-based model is constructed for the ferrite-austenite phase transformation of low carbon steels. The model is descret...
متن کاملAnalysis of Abrasive Wear Characterization and its Correlation with Structure for Low and Medium Carbon Steels
In most of the engineering applications, such as mining, metallurgy, agriculture; equipments are failed by the abrasive wear. The data as obtained form ministry of Research and Technology indicates that the percentage cost of abrasive wear in federal republic of German in metallurgy industry is 40%, mining industry 30%, agriculture 20% and production engineering 10%, and so the material selecti...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 1972
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.21.1