Low frequency amplifier and oscillator using simulated inductor
نویسندگان
چکیده
منابع مشابه
Low Frequency Active Tuned Oscillator Using Simulated Inductor
The generation of sine wave at low frequency is very tedious because the size of the inductors used in the circuit is very large and bulky. Hence the inductor is replaced with the simulated inductor. This study deals with the generation of sine wave from an active tuned oscillator which consists of the simulated inductor and capacitor. The oscillator makes use of the basic blocks of a band pass...
متن کاملLow Power Amplifier Design Using CMOS Active Inductor
In this paper, a CMOS low power amplifier based on a high-quality active inductor and implemented by using 0.25-μm 1P5M CMOS standard technology is presented. The amplifier achieves power gain (S21) of 18dB within the -3dB cutoff frequency, bandwidth of 1.3GHz, and power consumption of 18mW under 2.5V power supply in 188 × 174μm silicon area. The input third-order intercept point (IIP3) and the...
متن کاملPll Based Frequency Synthesizer Implemented with an Active Inductor Oscillator
High costs, bulkiness, and larger power consumption makes transceiver integration and miniaturization a desired option to discretely implemented transceivers. Furthermore, a frequency synthesizer forms an important part of high-frequency transceivers. In this paper, the design of a fully-integrated dual loop frequency synthesizer is detailed. Previously, frequency synthesizers have already been...
متن کاملLow-Voltage High-Frequency Gated Ring Oscillator Using Bootstrap Technique
This paper proposes a high frequency ring oscillator with low power consumption. The proposed ring oscillator is based on Gated Ring Oscillator (GRO) by applying boot strap technique. Simulation results indicate that the FoM (Power Consumption /Oscillation Frequency) of the proposed ring oscillator is greater than that of the conventional ring oscillator. Figure 1 shows delay element using boot...
متن کاملA Low Power Low Voltage Rail to Rail Constant gm Differential Amplifier with 150 dB CMRR and Enhanced Frequency Performance
This paper proposes a low voltage (±0.55V supply voltage) low power (44.65µW) high common mode rejection ratio (CMRR) differential amplifier (d.a.) with rail to rail input common mode range (ICMR), constant transconductance (gm) and enhanced frequency performance. Its high performance is obtained using a simple negative averaging method so that it cancels out the common mode input signals at th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2012
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2012.01.921