Low Grade Coal Firing in the Cyclone Furnace.

Co-Firing Ramie Residue with Supplementary Coal in a Cyclone Furnace

Co-firing ramie residue with coal was carried out in a thermogravimetric analyzer and a cyclone furnace to evaluate the effects of coal fraction (0 to 30 wt. %) on combustion performance. Thermogravimetric analysis (TGA) results showed that devolatilisation was the predominant process when the coal percentage in the blend was below 30 wt. %. For pure biomass firing in the cyclone furnace, an op...

Emissions and Furnace Gas Temperature for Electricity Generation via Co-firing of Coal and Biomass

The emissions of carbon dioxide and nitrogen and sulphur oxides for electricity generation with coal and biomass co-firing are investigated and the furnace gas temperature assessed. The study uses simulation and considers fuel combinations based on two coals (bituminous coal, lignite) and four types of biomass (rice husk, sawdust, chicken litter, refused derived fuel). With increasing biomass, ...

Blast Furnace Granular Coal Injection Project

A New Agro/Forestry Residues Co-Firing Model in a Large Pulverized Coal Furnace: Technical and Economic Assessments

Based on the existing biomass co-firing technologies and the known innate drawbacks of dedicated biomass firing, including slagging, corrosion and the dependence on fuel, a new model of agro/forestry residue pellets/shreds and coal co-fired in a large Pulverized Coal (PC) furnace was proposed, and the corresponding technical and economic assessments were performed by co-firing testing in a 300 ...

Model of pulverized coal combustion in a furnace

We describe behavior of the air-coal mixture using the Navier–Stokes equations for gas and particle phases, accompanied by a turbulence model. The undergoing chemical reactions are described by the Arrhenian kinetics (reaction rate proportional to exp ` − E RT ́ , where T is temperature). We also consider the heat transfer via conduction and radiation. Moreover we use improved turbulence-chemist...