Low temperature direct electroless nickel plating on silicon wafer
نویسندگان
چکیده
منابع مشابه
Electroless Nickel Plating on Magnesium Alloy
he inherent lightness and good strength-to-weight ratio of T magnesium has focused attention on increasing applications in aerospace and allied fields. Its density is two thirds that of aluminum-a conventional structure material for aerospace. Magnesium has one drawback: It is prone to atmospheric corrosion. Further, because of its high chemical affinity for aqueous solutions, it is categorized...
متن کاملElectroless Nickel Plating with Hypophosphite
In the previous chapter, the components of electroless nickel plating baths were discussed from the viewpoint of the function each performs in the bath, with little attention paid to their effect on the plating process. The metal and the electron source (the reducing agent) are consumed in the electroless plating reaction and so their concentrations in the bath are continuously decreasing. Ther...
متن کاملElectroless Nickel Plating: Bath Control
In this paper, bath control is proposed for the electroless nickel plating through holes board process. The main parameters of the product (board) – thickness of the plating film and phosphorous content – are stabilized at constant levels using optimal tracking control. The set point for control is calculated from the model in dependence on the current state of the process. The pH-index and nic...
متن کاملFormation of a Low Ohmic Contact Nickel Silicide Layer on Textured Silicon Wafers Using Electroless Nickel Plating
This paper presents a low cost process for fabrication of high efficiency silicon-based solar cells from front side ARC patterning through contact line metallization. This process utilizes a screen printable etch resist to define the contact pattern and a wet etching solution to remove the exposed ARC layer. The metallization stack for the contact line pattern consists of a nickel silicide ohmi...
متن کاملData-Based Modeling of Electroless Nickel Plating
This work connects the neocybernetic theory of elastic systems to modeling of a complex industrial process. It turns out that using simple mathematics combined with multilinear tools leads to linear models that can be used for monitoring and control. As an application example, electroless nickel plating is studied.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Chinese Institute of Engineers
سال: 2009
ISSN: 0253-3839,2158-7299
DOI: 10.1080/02533839.2009.9671490