Low temperature ductility and retained austenite in some ferritic cryogenic nickel steels.
نویسندگان
چکیده
منابع مشابه
Tensile Ductility of Nanostructured Bainitic Steels: Influence of Retained Austenite Stability
High silicon (>1.5%) steels with different compositions were isothermally transformed to bainite at 220 and 250 ◦C to produce what is often referred to as nanostructured bainite. Interrupted tensile tests were carried out and the retained austenite was measured as a function of strain. Results were correlated with tensile ductility. The role of retained austenite stability is remarkably underli...
متن کاملCharacterization of individual retained austenite grains and their stability in low-alloyed TRIP steels
In situ three-dimensional (3-D) X-ray diffraction experiments have been performed at a synchrotron source on low-alloyed multiphase TRIP steels containing 0.25 wt.% Si and 0.44 wt.% Al and produced with different bainitic holding times, in order to assess the influence of the bainitic transformation on the thermal stability of individual austenite grains with respect to their martensitic transf...
متن کاملHigh-energy X-ray diffraction study on the temperature-dependent mechanical stability of retained austenite in low-alloyed TRIP steels
The stability of the retained austenite has been studied in situ in low-alloyed transformation-induced-plasticity (TRIP) steels using high-energy X-ray diffraction during tensile tests at variable temperatures down to 153 K. A detailed powder diffraction analysis has been performed to probe the austenite-to-martensite transformation by characterizing the evolution of the phase fraction, load pa...
متن کاملتأثیر پارامترهای فرایند کوئنچ و پارتیشن‌بندی بر ریزساختار و کسر آستنیت باقی‌مانده
Certain amount of retained austenite can increase ductility of steels because of the TRIP phenomenon during plastic deformation. One method for achieving this is partitioning of carbon into austenite to stabilize it at room temperature. The quenching and partitioning (Q&P) heat treatment leads to a microstructure consisting of martensite and stabilized retained austenite between martensite plat...
متن کاملتأثیر چگالی نابجایی‌ها بر رفتار تغییر شکل فولاد بینیتی فوق مستحکم
Presence of nanoscale bainitic ferrites and high carbon retained austenites that are stable at ambient temperature within the microstructures of super strong bainitic steels makes it possible to achieve exceptional strengths and ductility properties in these groups of nanostructured steels. This article aims to study the effect of the dislocation density variations during tensile testing in amb...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Iron and Steel Institute of Japan
سال: 1982
ISSN: 0021-1583,1881-1183
DOI: 10.2355/isijinternational1966.22.696