Low-temperature sintering of high-siliceous clay under conditions of oxygen deficiency
نویسندگان
چکیده
منابع مشابه
degradation of oil impregnated paper insulation under influence of repetitive fast high voltage impulses
در طی سالهای اخیراستفاده ازمنابع انرژی تجدید پذیر در شبکه های مدرن بنا به دلایل زیست محیطی و اقتصادی به طور گسترده استفاده شده است همچون نیروگاههای بادی و خورشیدی .ولتاژتولیدی این نیروگاهها اغلب به فرم dc می باشد وادوات الکترونیک قدرت به عنوان مبدل و پل بین شکل موج dc وac استفاده می شوند.این پروسه باعث ایجاد پالسهایی برروی شکل موج خروجی می شود که می تواند وارد تجهیزات قدرت همچون ترانسفورماتور ی...
15 صفحه اولCFD Modeling Study of High Temperature and Low Oxygen Content Exhaust Gases Combustion Furnaces
This paper reports a CFD modeling study on the possibility of using high temperature and low oxygen content exhaust gases as oxidant for combustion in an industrial furnace by a written computer program. Under these conditions,the predicted results for the flow and heat transfer properties are compared with those under the several cases of conventional and highly preheated...
متن کاملInvestigation of influences of alloying elements and sintering temperature on the properties of high strength low alloyed sintered steel
Producing parts with high density and improved mechanical properties is one of the most important aims of powder metallurgy process. There are many factors for attaining modified properties in sintered parts but among them controlling type and quantity of alloying elements and manufacturing parameters such as compacting pressure, sintering temperature are the most effective. In this research, t...
متن کاملCultivation of Neisseria gonorrhoeae under low-oxygen conditions.
Sixteen Neisseria gonorrhoeae strains were examined for their abilities to grow under reduced oxygen tension. Low oxygen tensions were developed by evacuation-replacement procedures in which anaerobes and oxidation-reduction indicators were used as controls. All strains survived 96 h in a medium reduced to below -125 mV without visible growth. Detectable growth occurred at 0.05% oxygen, and 33%...
متن کاملSize control of Cu nanorods through oxygen-mediated growth and low temperature sintering.
Control of the size of Cu nanorods vapor-deposited at an oblique angle (approximately 85 degrees) by oxygen-mediated growth was investigated using scanning electron microscopy (SEM) and x-ray diffraction (XRD). It was observed that exposure of Cu nanorods to the oxygen ambient periodically resulted in a reduction in the diameter of the nanorods as well as an increase in the areal density of the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Science of Sintering
سال: 2021
ISSN: 0350-820X,1820-7413
DOI: 10.2298/sos2102137a