Low temperature synthesis of nanocrystalline tantalum nitride
نویسندگان
چکیده
Tantalum nitride (Ta2N) nanocrystals have been successfully synthesized at 650 °C through a chemical reaction in an autoclave. The X-ray powder diffraction pattern indicates that the product is hexagonal phase Ta2N. Transmission electron microscopy image shows obtained Ta2N consist of nanoparticles with average size about 50 nm. Furthermore, thermal gravimetric analyzer (TGA) result has good stability and oxidation resistance below 300 air.
منابع مشابه
LOW TEMPERATURE SYNTHESIS OF NANOCRYSTALLINE MgAl2O4 SPINEL VIA SUCROSE PROCESS
Abstract: Nanocrystalline MgAl2O4 spinel powder was synthesized using metal nitrates and a polymer matrix-based composed of sucrose and polyvinyl alcohol (PVA). The precursor and the calcined powders were characterized by simultaneous thermal analysis (STA), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and scanning electron microscopy (SEM). According to XRD res...
متن کاملHigh temperature thermal properties of thin tantalum nitride films
Related Articles Effects of heat treatment and contact resistance on the thermal conductivity of individual multiwalled carbon nanotubes using a Wollaston wire thermal probe J. Appl. Phys. 111, 054321 (2012) A 3-dimensional time-resolved photothermal deflection “Mirage” method Appl. Phys. Lett. 100, 091908 (2012) Thermal characterization of composites made up of magnetically aligned carbonyl ir...
متن کاملGreen Method for Synthesizing Gallium Nitride Nanostructures at Low Temperature
Gallium nitride (GaN) nanostructures (NS) were synthesized using pulseddirect current plasma enhanced chemical vapor deposition (PDC-PECVD) on quartzsubstrate at low temperature (600°C). Gallium metal (Ga) and nitrogen (N) plasma wereused as precursors. The morphology and structure of the grown GaN NS werecharacterized by field emission scanning electron microscope (FE-SEM), transmissionelectro...
متن کاملLow Temperature Sintering Additives for Silicon Nitride
This work deals with sintering additives for the low temperature pressureless sintering of Si3N4, via a transient liquid technique. Much attention has been given to the development of a sintering process using low-cost Si3N4 powder (Silzot HQ, Germany) as the starting material and employing sintering additives which are also both economically attractive and enable sintering at low temperatures....
متن کاملPreparation and Instability of Nanocrystalline Cuprous Nitride.
Low-dimensional cuprous nitride (Cu3N) was synthesized by nitridation (ammonolysis) of cuprous oxide (Cu2O) nanocrystals using either ammonia (NH3) or urea (H2NCONH2) as the nitrogen source. The resulting nanocrystalline Cu3N spontaneously decomposes to nanocrystalline CuO in the presence of both water and oxygen from air at room temperature. Ammonia was produced in 60% chemical yield during Cu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 2023
ISSN: ['1882-0743', '1348-6535']
DOI: https://doi.org/10.2109/jcersj2.23001