Low Velocity Impact of Filament-Wound Glass-Fiber Reinforced Composite Pipes
نویسندگان
چکیده
منابع مشابه
Damage Assessment in Glass Fiber-Epoxy Matrix Composite under High Velocity Impact of Ice
This study investigated the influence of nanoclay on the impact damage resistance of glass fiber-epoxy composites under high velocity ice impact loading. Addition of 0.5 wt. % nanoclay into epoxy was shown to improve damage resistance compared to composite plates having no nanoclay platelet. The glass fiber-epoxy composites containing nanoclay brought about substantial improvement in ice impact...
متن کاملHigh-velocity impact properties of multi-walled carbon nanotubes/E-glass fiber/epoxy anisogrid composite panels
This work reports the high-velocity impact response of multiscale anisogrid composite (AGC) panels. The aim of the present study is to evaluate the influence of surface-modified multi-walled carbon nanotubes (S-MWCNTs) at different S-MWCNTs contents (0-0.5 wt.% at an interval of 0.1 wt.%) on the high-velocity impact responses of E-glass/epoxy AGC. Surface modification of MWCNTs is confirmed by ...
متن کاملLow Velocity Impact Behavior of Glass Filled Fiber-Reinforced Thermoplastic Engine Components
This paper concerns automotive parts located underneath the engine and in particular the engine oil pan. Classically made of stamped steel or cast aluminum, new developments have allowed the manufacture oil pans with polyamide 66 reinforced by 35% weight of short glass fiber. However, polyamides have some limitations and the most significant is their response to localized impact loading. The na...
متن کاملDevelopment of Porous Glass-fiber Reinforced Composite for Bone Implants
Sara Nganga. Development of porous glass-fiber reinforced composite for bone implants. Evaluation of antimicrobial effect and implant fixation. Department of Biomaterials Science, Institute of Dentistry, University of Turku. Annales Universitas Turkuensis, Turku, Finland, 2013. Cranial bone reconstructions are necessary for correcting large skull bone defects due to trauma, tumors, infections a...
متن کاملMachinability of glass fiber reinforced plastic (GFRP) composite materials
This paper deals with the study of machinability of GFRP composite tubes of different fiber orientation angle vary from 30 to 90. Machining studies were carried out on an all geared lathe using three different cutting tools: namely Carbide (K-20), Cubic Boron Nitride (CBN) and Poly-Crystalline Diamond (PCD). Experiments were conducted based on the established Taguchi’s Design of Experiments (DO...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Material Science & Engineering
سال: 2016
ISSN: 2169-0022
DOI: 10.4172/2169-0022.1000253